Set van Mario (Arcam AV40 processor)

[morca]

Erg apart wel met headphone!!

https://www.youtube.com/watch?v=Mm-x03KGbVU

Ik word er dizzy van 
Enya ook even geluisterd.
Echt apart

[holco]

Openingspost aangepast naar de actuele situatie.

[holco]

Niet iets waar je dagelijks naar moet luisteren maar wel knap hoe ze je hersenen in de maling kunnen nemen 

Ik word er dizzy van 
Enya ook even geluisterd.
Echt apart

[flakkees]

misschien is Shpongle wel wat voor je 

[holco]

Die ga ik uiteraard eens opzoeken 

misschien is Shpongle wel wat voor je 

[toetertje]

Die ga ik uiteraard eens opzoeken 

Shpongle
My head feels like a frisbee.  (verplicht een beetje op volume) 

[morca]

Niet iets waar je dagelijks naar moet luisteren maar wel knap hoe ze je hersenen in de maling kunnen nemen 

Heel bijzonder idd

[RZeemering]

Ik vind het over de speakers beduidend leuker klinken

[holco]

Eerlijk gezegd nog niet geprobeerd.

Ik vind het over de speakers beduidend leuker klinken

[holco]

Weinig te melden, set speelt nog steeds op top niveau, en vooralsnog geen wensen op audio/HT  gebied 

[PascalP]

Weinig te melden, set speelt nog steeds op top niveau, en vooralsnog geen wensen op audio/HT  gebied 

Altijd positief om te horen toch
Maar je nog vergeleken met standaard kabels en je eigen met C14 stekkers?

[holco]

Ik heb die andere kabels met de C14 stekkers (HT apparatuur) met
tussenposes verwisseld, het is niet zo dat ik daarmee een echte verbetering
heb bemerkt maar voor mijn gevoel zit het wel goed nu, de kabel bende achter
de set is ook wat opgeruimder nu door exacte lengtes

Altijd positief om te horen toch
Maar je nog vergeleken met standaard kabels en je eigen met C14 stekkers?

[holco]

Top film, erg van genoten 

https://www.netflix.com/title/80230399?s=a&trkid=13747225&t=cp

[kermy]

Top film, erg van genoten 

https://www.netflix.com/title/80230399?s=a&trkid=13747225&t=cp

Gisteren gekeken, ik vond het een hele goede film, en dat op Netflix.


Met vriendelijke groet,

Kermy

[holco]

Money well spent

Gisteren gekeken, ik vond het een hele goede film, en dat op Netflix.


Met vriendelijke groet,

Kermy

[flakkees]

Die ga ik uiteraard eens opzoeken 

en shpongle al gevonden ? het is zondag maat .

[holco]

Ben nu aan het luisteren,  maar wat kan je hier het beste bij roken?

en shpongle al gevonden ? het is zondag maat .

[toetertje]

my head feels like a frisbee, wordt verderop in het nummer echt lekker.
Je hoeft er niet bij te roken, een mandje paddestoelen doet het ook goed. 

[holco]

Helaas, heb het genre al weer verlaten 

[holco]

Interessante AV processor!!

https://www.monoprice.com/product?p_id=37887





Vinkt zo'n beetje alle wens boxen af voor $4000

Helaas nog geen EUR importeur alhoewel ik begrepen heb dat ze wel plannen hebben om de Europese markt te gaan betreden.

Review op audiosciencereview.com uitgevoerd door amirm
https://www.audiosciencereview.com/forum/index.php?threads/monoprice-htp-1-home-theater-processor-review.11416/


https://www.avsforum.com/forum/90-receivers-amps-processors/3040246-monoprice-htp-1-announced-16ch-9-1-6-atmos-surround-sound-processor.html

Owner Impressions/Reviews (Verrassend om te lezen dat bij de HTP-1 zo'n beetje alles werkt out off the box, noem geen namen maar er zijn merken die zich flink moeten schamen met wat ze op de markt durven te zetten!!)

vraxoin
https://www.avsforum.com/forum/90-re...l#post59030514
https://www.avsforum.com/forum/90-re...l#post59032536
https://www.avsforum.com/forum/90-re...l#post59034632
pink soda
https://www.avsforum.com/forum/90-re...l#post59049424
tyson1749
https://www.avsforum.com/forum/90-re...l#post59048110
FilmMixer
https://www.avsforum.com/forum/90-re...l#post59069560
wilbur_the_goose
https://www.avsforum.com/forum/90-re...l#post59130736
RickAVManiac
https://www.avsforum.com/forum/90-re...l#post59176926

[Dirk]

Interessante AV processor!!

Vinkt zo'n beetje alle wens boxen af voor $4000

Owner Impressions/Reviews (Verrassend om te lezen dat bij de HTP-1 zo'n beetje alles werkt out off the box, noem geen namen maar er zijn merken die zich flink moeten schamen met wat ze op de markt durven te zetten!!)

afvinken van alle boxen qua spec-lijstjes doen verschillende van die "andere merken" ook, vraag is alleen wanneer een model probleemloos draait, want dàt doet zover ik zie eigenlijk (nog) geen enkele AVR in deze <5000€ categorie vd markt.

dat je niet(s) leest over HTP-1 eigenaars die dergelijke issues hebben is wel apart, maar misschien kijk je niet met dezelfde bril naar alle kandidaten

[holco]

Ben uiteraard ook erg benieuwd naar andere processoren met de zelfde specs en +/- prijs die ook redelijkerwijs out off the box bieden wat ze beloven.

Schiet maar los?

afvinken van alle boxen qua spec-lijstjes doen verschillende van die "andere merken" ook, vraag is alleen wanneer een model probleemloos draait, want dàt doet zover ik zie eigenlijk (nog) geen enkele AVR in deze <5000€ categorie vd markt.

dat je niet(s) leest over HTP-1 eigenaars die dergelijke issues hebben is wel apart, maar misschien kijk je niet met dezelfde bril naar alle kandidaten

[Dirk]

ik schrijf niet dat die er zijn, beter lezen.

jij stelt echter dat deze HTP-1 wel "probleemloos" out of the box werkt itt al die anderen, da's wat imo niet klopt en wat je ook kan lezen op fora over dit model, maar zoals ik aangaf...mogelijk had je een andere bril op.

[holco]

Ok'e op die fiets 

Wat mij juist opviel in de forum reviews is dat deze HTP-1 out of the box voor 95% doet wat ze beloven, dat er wat issues zijn lijkt mij vrij normaal met zo'n complex apparaat net na de release, zolang er maar aan gewerkt wordt is dat prima.

Als we dat afzetten tegen hoe de nieuwe Arcam AV lijn over de schutting is gegooid en nu nog steeds vol met bug's zit ondanks onderstaande al verwerkt bug lijstje (LOL), vindt ik het lovenswaardig hoe Monoprice een nieuw product op de markt zet.

Host Version 1v24/09
LCD/IAP 0.60/0.04
DSP1 02.03 / 01.29
DSP2 00.01 / 00.17
DTS/IMAX 3.90.50.1/390.508.2.0 OSD 0.03
DAB 303 / 561
NET 0.100.534
BT 0.7 (or higher, depending on build)
Fix list:
IMS20780: Show album art.
IMS20890: IMAX Enhanced fixes.
IMS20910: When front display set to off, also turn off backlight.
IMS21071: Implement Auro-3D.
IMS21377: If clipping occurs with Dirac calibration, there are audio artefacts on exit.
IMS21382: In Dirac level setting screen there is a noise from the other speaker before selected speaker. IMS21410: Mode direct IR commands fixed.
IMS21411: No unsolicited messages on mode change.
IMS21431: RS232/IP Display information type (0x09) does not respond.
IMS21433: RS232/IP Stereo mode (0x10) always returns mono.
IMS21539: Adjust level to match "mid green" setting for Dirac calibration
IMS21434: RS232/IP MCH mode (0x11) always returns mono.
IMS21508: Implement periodic LF sweep for subwoofer Dirac calibration level setting.
IMS21545: If subwoofer set to none, L/R forced to large, even if Ch13/14 and/or Ch15/16 set to subs. IMS21549: Auto-standby disabled during update.
IMS21553: AMP+RIGHT toggles HDMI Zone1 outputs.
IMS21557: Sub distance lost for Dirac off when toggling Dirac on/off.
ISM21574: Increase time counter to 999:99 minutes for internet radio.
IMS21590: Disable all gains/delays/processing when running Dirac capture.
IMS21595: Add Power, volume & mode controls to web GUI.
IMS21644: RTN key (sub trim) has no effect if ch13/14 or ch13-16 only set as subs.
–3–
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK
23425
AVR10/AVR20/AVR30/AV40 Software Release Notes
Host Version 1v22/09 LCD/IAP 0.55/0.04 DSP1 02.03 / 01.23 DSP2 00.01 / 00.17 DTS 3.90.50.1
OSD 0.03
DAB 303 / 561
NET 0.100.472
BT 0.7 (or higher, depending on build)
Fix list:
IMS21086: Input Config > MCH mode operation improved.
IMS21087: Input Config > Mode operation improved.
IMS21121: Audio lost with analogue & DTS Virtual:X.
IMS21216: Roon Tidal MQA higher Fs tracks could be distorted.
IMS21350: Prevent turn off audio artefacts on low mains for processor model.
IMS21370: Speakers grouped in a single group within the Dirac calibration tool.
IMS21507: Headphone downmix operation improved.
IMS21509: CH13-16 test tones in Dirac Calibration tool incorrectly mapped for wide speakers. IMS21513: DAB/FM/NET inputs could fail to give audio in zone2 in some setups.
IMS21523: Startup behaviour modified to allow DSP/net boot time.
IMS21527: Dirac calibration tool test tones not correctly mapped for ch13-16 wides/heights. IMS21532: RS232/IP power state not sent when powering off with RC5 toggle command. IMS21542: Add HDR10, HDR10+, HLG & Dolby Vision indicators to video resolution menu item.
–4–
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK

23425
AVR10/AVR20/AVR30/AV40 Software Release Notes
Host Version 1v20/09 LCD/IAP 0.53/0.04 DSP1 02.02 / 01.20 DSP2 00.01 / 00.17 DTS 3.90.50.1
OSD 0.03
DAB 303 / 561
NET 0.100.457
BT 0.7 (or higher, depending on build)
Fix list:
IMS21126: 192kHz/96kHz stream played over Qobuz has artefacts
IMS21199: Test tones do not work from web GUI.
IMS21300: Audio artefacts when switching from 192kHZ to 96kHz on Tidal/Qobuz
IMS21314: Input > Mode > Sub stereo has no effect.
IMS21324: Applying stereo downmix to DD+ stream results in breif noise
IMS21335: With front display off, Sub trim and Dolby Volume do not appear with 2nd change. IMS21346: RS232/IP command 01B returned incorrect detail for some results
IMS21348: RS232/IP command 0x37 returned 0x02 instead of 0x04 when not calculated. IMS21349: RS232/IP command 0x39 was off by one.
IMS21368: Direct IR mode commands did not work
IMS21380: Audio takes 30seconds to restore after Dirac calibration – notification applied. IMS21381: Lip sync out if setting via web GUI and then power cycle.
IMS21391: User adjustments to Dirac delays lost if filter toggled off/on.
IMS21408: RS232/IP Engineering menu send invalid response.
IMS21420: Cannot select Dirac EQ from web GUI.
IMS21421: If an input is renamed on the unit, the name was not updated on web GUI. IMS21429: RS232/IP Command 0x04 Version reports incorrect version
IMS21430: RS232/IP Command 0x06 Save/Restore settings fixed
IMS21432: RS232/IP Command 0x1F corrected.
IMS21446: Requesting Zone1 OSD (0x4E) returns inverted data.
IMS21448: RS232/IP Command 0x24 DAB scan corrected.
IMS21451: Audio compression command 0x41 fixed.
IMS21454: Add response 0x02 to command 0x2B to allow mS in speaker distances. IMS21455: Command 0x2D did not send ack.
IMS21456: Setup menu commands did not send ack.
IMS21440: RS232/IP command 0x3A range was invalid.
IMS21441: RS232/IP command 0x40 unable to set lipsync.
IMS21448: RS232/IP command 0x24 DAB scan could not be restarted after 1st completion. IMS21442: RS232/IP command 0x42 could not request incoming video parameters. IMS21443: RS232/IP command 0x43 could not request incoming audio format.
IMS21444: RS232/IP command 0x44 could not request incoming audio sample rate. IMS21445: RS232/IP command 0x45 could not set/request sub stereo trim.
IMS21456: RS232/IP menu commands did not send ack.
IMS21457: RS232/IP setting input name did not send unsolicited message.
IMS21458: Unable to select Dirac filter from command 0x28
IMS21460: If no sub, when L/R set to small, sub is not added.
IMS21472: When using NET there is a brief noise when changing mode to DTS Neural:X IMS21473: Add startup progress bar to allow DSP/Net time to boot
–5–
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK

23425
AVR10/AVR20/AVR30/AV40 Software Release Notes
IMS21476: RS232/IP command 0x2B not sent for mS unit.
IMS21487: Add INFO+MODE host reset (does not reset Network settings).
IMS21488: Setting speaker types with web GUI isn't reflected in the Dirac calibration tool. IMS21499: Lipsync out if going from DTS5.1 to Dolby Atmos.
IMS21505: Erroneous fail messages, e.g CS3318 corrected.
Host Version 1v10/09 LCD/IAP 0.50/0.04 DSP1 02.01 / 01.19 DSP2 00.01 / 00.17 DTS 3.90.50.1
OSD 0.03
DAB 303 / 561
NET 0.100.406
BT 0.7 (or higher, depending on build)
Fix list:
IMS20890: IMAX fixes applied.
IMS20955: Show streaming service logo & MQA logo when using Cast.
IMS21115: PS4 2 channel PCM using Virtual:X could cause audio artefacts
IMS21118: Sampling frequency incorrectly shown for analogue processing modes.
IMS21136: Sub trim does not show on OSD
IMS21208: When in standby, control commands for input switching should respond with 0x85 IMS21310: Bi-amp L/R speakers not recognised by Dirac calibration tool.
IMS21363: Cannot set display brightness over RS232/IP
IMS21369: When Dirac is enabled, speaker distance should show "mS".
IMS21371: Audio button toggles filter1, filter2, filter3, off.
IMS21372: Menu > Speaker Distance Sub shows as "Channel 12"
IMS21375: No OSD popup when Dirac EQ selected.
IMS21378: Dirac filters optimisation.
IMS21383: Start Dirac, unit would occasionally not got into Dirac measurement mode IMS21384: Report Subwoofers as "sub" not LFE in Dirac calibration tool.
IMS21390: OSD shows "centre" and "analogue" when region set to US/Canada.
IMS21396: Start Dirac if on the NET input, test tones only come out of FL0
IMS21409: Audio button recalls current state on first press, then changes.
IMS21437: Cannot set IMAX Enhanced mode over RS232/IP
IMS21447: Editing name on unit after setting with web GUI causes crash
IMS21453: Dirac master volume level starts at incorrect level
Host Version 1v04/09 LCD/IAP 0.46/0.04 DSP1 02.01 / 01.18 DSP2 00.01 / 00.17 DTS 3.90.35.00
OSD 0.03
DAB 303 / 561
NET 0.100.375
BT 0.7 (or higher, depending on build)
–6–
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK

23425
AVR10/AVR20/AVR30/AV40 Software Release Notes
Fix list: 20895: 21133: 21200: 21233: 21244: 21301: 21315:
Enable Dirac room EQ.
MQA files played from USB do not show as MQA.
Could not turn on unit with RS232 unless HDMI & IP was set to on.
Audio lost if playing DTS Virtual:X and then add height speakers. European character support , e.g. 'á'.
Turning Z2 off from IP when Z1 is in standby stops IP control.
Menu > Input Config > Room EQ, OSD shows "Room_EQ", remove the "_"
Host Version 0v99/09 LCD/IAP 0.43/0.04 DSP1 02.01 / 01.14 DSP2 00.01 / 00.17 DTS 3.90.35.00
OSD 0.03
DAB 303 / 561
NET 0.100.335
BT 0.5 (or 0.7 depending on build)
Fix list:
20810: Network playback source not paused if switching away from the input.
20890: IMAX Enhanced enabled.
21188: Audio lost with ChromeCast Ultra on some Atmos streams.
21198: Apple TV 4k/Netflix/Atmos stream – audio takes 30 seconds if exiting to menu and going back.
Host Version 0v95/09 LCD/IAP 0.41/0.04 DSP1 02.01 / 01.12 DSP2 00.01 / 00.10 DTS 3.90.35.00
OSD 0.03
DAB 303 / 561
NET 0.100.307
BT 0.5 (or 0.7 depending on build)
Fix list: 21069: 21098: 21100: 21101: 21122: 21123: 21124: 21125: 21127: 21128: 21129: 21130: 21135:
Some DD+/True HD/Atmos streams cause audio artefacts with stereo downmix.
Test tones may not start if there is no incoming audio after playing an Atmos stream. Audio can be lost if test tones started while playing Atmos stream.
Audio can be lost while adding/removing speakers while playing audio.
DTS ES Discrete 3/3.1 displayed as 3/2.1.
If playing from USB, display USB instead of NET.
Speaker types cannot be set to "none" over RS232.
Audio can be lost if switching stream between DTS HD MA & Atmos.
NET input incorrectly showed incoming stream as analogue.
Channels 13-16 could give no output if set to sub out with some speaker configs. When using analogue inputs, channel count incorrectly shown.
Unit could go into auto-standby while playing Airplay streams.
Dolby volume (pop up key on remote) leave blank grey banner on OSD.
–7–
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK

23425
AVR10/AVR20/AVR30/AV40 Software Release Notes
21181: No output from surround back if changing to zone 2 and back to surround back in channel 6/7. 21182: No audio after adjusting surround back speaker.
21189: Unit could go into auto-standby while playing UPnP streams.
–8–
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK

23425
AVR10/AVR20/AVR30/AV40 Software Release Notes
Host Version 0v89/09 LCD/IAP 0.39/0.04 DSP1 00.01 / 01.10 DSP2 00.01 / 00.10 DTS 3.90.35.00
OSD 0.03
DAB 303 / 561
NET 0.100.278
BT 0.5 (or 0.7 depending on build)
Fix list:
20860: Confirmation sound not played during Google Home setup.
20878: Display could show higher sample rates as 48kHz incorrectly.
20912: DAC parameters optimised for max. SNR performance.
21032: Higher sampling rate incoming streams could have artefacts.
21066: Could lose audio when switching to Atmos stream from another stream type. 21074: Optimise USB update of network module.
21076: Improve ARC compatibility with some displays.
21077: Correct typo in display of kHz on incoming sample frequency in Input Config menu.
21081: No audio from NET input if powered on the NET input. 21088: Fix typo in speaker types menu when set to US region.
21090: HDMI Bypass in standby may not work with some displays.
21091: No zone2 audio if incoming audio stream is hi bit rate.
21099: No RS232 message to indicate no menu after sub trim times out.
21102: Dolby Digital 3.0 streams not correctly rendered.
21103: OSD shows wrong surround format if switching to an input with stream already playing.
21104: Legacy DTS in some speaker setups has audio artefacts.
21116: Analogue input shows PCM 2/0.0
21117: Correct typo in the display of stereo direct in menu > general setup > incoming format.
Host Version 0v82/09 LCD/IAP 0.36/0.04 DSP1 02.01 / 01.07 DSP2 00.01 / 00.10 DTS 3.90.35.00
OSD 0.03
DAB 303 / 561
NET 0.100.239
BT 0.5 (or 0.7 depending on build)
Fix list:
20828: PCM 2.0 @ 96kHz/192kHz sometimes not recognized correctly. 20893: OSD with Dolby Vision content shifted on some displays.
20903: Play Atmos, play internal test tones, audio does not return.
20904: Test tones did not work after playing Atmos stream.
20914: Analogue input trim optimised.
20939: Zone 2 audio out "follow zone 1" no output.
20950: Zone 2 inputs not changing with simulated IR over RS232/IP.
–9–
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK

23425
AVR10/AVR20/AVR30/AV40 Software Release Notes
20954: DTS:X to DTS HD MA 2.0 exchange causes audio artefact.
20972: Dolby digital incoming format display changed with different speaker setups.
20982: Correct MQA Studio icon text size.
21004: IP/RS232 command supports 4 digit PIN for secure backup.
21018: Restore backup to USB could cause lockup with some USB sticks.
21019: Store backup to USB could cause lockup with some USB sticks.
21025: IP/RS232 requesting input config too soon after input change should return 0x85 until ready. 21044: PCM > MCH > Dolby Surround causes audio artefact.
21047: Input trim could not be selected if source changed from digital to analogue.
21048: Volume setting for zone 2 could not be adjusted if selecting zone 2 with AMP+OK on remote. 21061: Turn on Zone1, then Zone2, turn off Zone1 & Zone2, turn on just Zone2, HDMI may not start. 21063: Network may not function if both Zone1 & Zone2 select network input.
21065: Startup OSD not centered on some displays at turn on.
21072: Implement DTS Virtual:X
Host Version 0v75/09 LCD/IAP 0.31/0.04 DSP1 00.01 / 01.00 DSP2 00.01 / 00.05 DTS 3.90.50.00
OSD 0.03
NET 0.100.178 BT 0.5
Fix list:
Initial release. 

[Dirk]

blijven zoeken...je bril bedoel ik