HDI Dune 3.0 (niet 1.0 of 2.0 dus)

[skank1]

Is er niemand hier die zn icoontjes wil aanpassen op zn mainscreen maar die gelinkt zijn naar usershares?

Kleine update, ik had geprobeerd gewoon het icoontje maar met dezelfde naam van yadis te veranderen in mn usershare, zonder succes
Nu dacht ik, laat ik het eens proberen voordat ik alles exporteer naar mijn usershare yadis
Zodoende, in de werkmap het icoontje veranderd, yadis laten draaien en geexporteerd naar mn usershare
En rara, nu werkt het icoontje wel!
Wat is nu het verschil want ik zie het echt niet ! (Moeten alle submappen ook hetzelfde icoontje en dune_folder.txt hebben?) Ik denk het niet vermits de shortcut naar de disk zelf wel werkt met enkel beide bestanden in de hoofdmap..

[jowi]

Net nogmaals een vers gedownloade bd-unstop geprobeerd, niets. Aller-allerlaatste fw, niets. Storage opnieuw init, niets. Dune direct op de Kuro (dus zonder tussenkomst van Arcam's fenomenale hdmi handshake kunsten) niets.

Ik geef het op. Zal dan wel exemplarisch zijn, weet het anders ook niet. Als in maart een nieuwe serie Dunes komt sta ik vooraan.

[papaleo]

Jongens, probeer even te begrijpen dat het om EXACT dezelfde download dient te gaan. Zo moeilijk is dat toch niet om te snappen?

Natuurlijk begrijp ik dat,zag alleen de link van jouw 'vastloper' file niet,vandaar dat ik mijn filename had toegevoegd...dacht van; misschien is het deze wie je had binnen gehaald,dus niet.
Maar heb nu de link gezien en ga 'm vandaag eens proberen...

[evilniek]

Gebruikt Riwi misschien de regio/zone software mod?

[jowi]

Gebruikt Riwi misschien de regio/zone software mod?

Die gebruik ik ook. Het is een A disc, en bij regio B meldt ie ook keurig dat ie niet wil afspelen.
Met de speler op regio A meldt ie dat niet maar speelt ie gewoon niet af.

[riwi]

Gebruikt Riwi misschien de regio/zone software mod?

Ja inderdaad. Een tweede 'probleem' met de disk is dat ie regio A is. Dus de regiopatch moet je wel hebben.
Maar jowi's en raymen's probleem is toch iets anders. Ik snap dat ook niet.

Er is nog ergens een optie waar je kan instellen of er 'live' data van internet geplukt mag worden (of is dat een optie in de Oppo?). Misschien dat de disk eist dat die optie aan staat? Van mij mag alles en iedereen naar internet.

[jowi]

Nee zulke opties zitten er niet op de Dune. Ik snap werkelijk niet wat er aan mijn/raymen's situatie nu anders is. Behalve dan dat het wellicht exemplarisch is voor beide Dunes, maar dat is zó onwaarschijnlijk... het is geen dure kabel met onverklaarbare magische voodoo kenmerken maar gewoon een chip met software.

[charleyr]

Nieuwe firmware released: HDI Firmware Update (110127_2105_beta)

Voor info, check

http://www.mpcclub.com/forum/showthread.php?t=26307

of http://dune-hd.com/firmware/

[riwi]

Gisteravond geladen. Geen problemen gehad, maar ik heb slechts een paar files getest.


Download: dune_firmware_bdprime3_110127_2105_beta.dff (ZIP)
Changes since 101201_1626:

* Various playback improvements.
  - Bugfix: Specific MP3 files were playing with distortions when played
    during photo viewing).
  - Bugfix: Specific AVI files with AC3 audio were playing without sound,
    and no file with audio could be played afterwards.
  - Bugfix: Specific AVI files with H.264 video were not playing, and no
    other video file could be played afterwards.
  - Improvement: unsupported non-LC AAC audio tracks in MKV are not shown
    in the list of audiotracks to avoid confusing the user.
  - Bugfix: The setting "HDMI audio = disabled" did not work properly in
    some cases with some equipment.
  - Bugfix: Specific AVI files with AAC audio could not be played
    correctly.
  - Added support for playback and recorinding of A/V streams based on MMS
    protocol (useful for MMS-based Internet Radio and Internet Video
    resources).

* Added support for MMS audio/video streaming protocol.
  - Useful for MMS-based Internet Radio and Internet Video resources.
  - Both playback and recording of MMS streams is supported.
  - Usage: launch playback of MMS URL ("mms://...") via .M3U playlist file
    or in any other way supported by Dune.

* Volume control improvements.
  - Added a new setting "Audio / Volume control" with the following
    possible values:
     - "Off". Volume control is completely disabled. The volume level is
       fixed at 100% (0dB) and the player does not perform any
       modifications of the digital audio signal.
     - "Best quality". The default setting. The user is allowed to control
       the volume in the safe range till 0dB (ensuring no audio
       distortions on all audio content). When needed for specific files,
       it is also possible to temporarily overcome the 0dB limit by
       pressing and holding "V+" RC button for several seconds (the
       increase volume level takes effect only for the current playback
       session and is automatically reset to 0dB when the playback session
       finishes).
     - "Allow overload". The setting corresponding to the behavior taking
       place in previous firmware versions. The user is allowed to set the
       volume to values greater than 0dB. Depending on played content,
       this may lead to severe audio distortions and thus is not
       recommended.
  - Added a new setting "Audio / Volume indication" with the following
    possible values:
     - "Percents". The default setting. The volume level is shown as
       [0..100%] (corresponding to [-48..0dB] range). When the volume
       level is set to 100%, the player does not perform any modifications
       of the digital audio signal. Overloaded volume level is shown as
       (100..150%] (corresponding to (0..+24dB] range).
     - "Decibels". The setting corresponding to the behavior taking place
       in previous firmware versions. The volume level is shown in
       decibels.
  - Volume control for background audio during photo viewing is
    implemented in the same way as for regular file playback.
  - NOTE: As in previous firmware versions, the player can apply volume
    control only to PCM audio signal (i.e. when playing PCM audio tracks
    or audio tracks which are decoded by the player itself); when using
    "bitstream" audio output mode and playing audio tracks supporting
    bitstream output, the volume control does not take any affect. When
    A/V receiver is used, it is recommended to control the volume using
    the A/V receiver.

* Other OSD improvements.
  - When performing time navigation using LEFT/RIGHT/UP/DOWN/P+/P- RC
    buttons (in file/DVD playback mode), the OSD does not only show the
    selected playback position, but also shows the offset from the current
    playback position.
  - Certain notification OSD elements, such as volume control and certain
    information messages can now be quickly hidden by pressing any
    non-relevant RC buttons (no need to wait for autohide timeout).

* Added IP Control possibilities (control the player from iPhone etc).
  - A simple HTTP protocol allows to control the player from network
    (start/stop playback of the given media resources, control the
    playback, check current player status, emulate RC button presses,
    etc).
  - Applications for various devices can be created based on this IP
    Control procotol. Several such applications are already announced /
    provided (e.g.: applications for iPhone/iPad, integration with
    Control4 smart home systems).
  - More information: http://dune-hd.com/support/ip_control

* Added new possibilities for authors of FlashLite applications.
  - Added ability for FlashLite application to store persistent data in
    the flash memory of the player ("persistent SharedObjects").
  - Added support for showing specific text message on the front panel
    display (for player models having front panel display) on startup of
    FlashLite application.
  - More information: http://dune-hd.com/support/flash

* Added new UI customization possibilities (for "dune_folder.txt"
 applications).
  - Added a possibility to load icons shown in the right panel of the
    "extended list view" asynchronously. When this feature is enabled,
    navigation in such folders becomes much faster.
     - Syntax:
        - async_icon_loading = yes
  - Added "icon_archive" feature, allowing to download a collection of
    icons/images from an HTTP server once when entering certain folder,
    and cache it in the player (in System Storage), that allows to
    significantly improve the performance.
     - Syntax:
        - icon_archive.{n}.name = {name}
        - icon_archive.{n}.url = {HTTP-URL-to-TGZ-archive}
        - icon_path = icon_archive://{name}/{file-path-in-archive}
     - When a new version of the icon archive is deployed on the HTTP
       server, a modified URL should be used for it, then the player will
       automatically reload the icon archive next time when the user opens
       the folder.

* Setup usability improvements.
  - When the user tries to exit "Video" or "Network" setup screen with
    unsaved changes, a warning dialog is shown. The user is asked to
    either apply the changes, discard the chances, of cancel the action.
  - When selecting WiFi network connection type, the WiFI settings dialog
    is shown automatically.
  - When selecting PPPoE network connection type, the PPPoE settings
    dialog is shown automatically.

* Added built-in functions for management of System Storage.
  - New Setup page "Miscellaneous / System Storage" provides the following
    functions:
     - "Initialize System Storage": allows to initialize the system
       storage if it is not configured yet. Two possibilities are
       provided: create the system storage on an empty storage device (USB
       flash drive, SD card, an already existing HDD partition), or
       partition an empty HDD into system storage and user data
       partitions. Usage instructions:
        - The system lists all found empty 1GB+ storages.
        - Select the desired storage.
        - If the selected storage's capacity is less than 100GB, the
          entire storage is initialized as the system storage.
        - Otherwise, if the selected storage is 100GB+ storage device, it
          is partitioned into two partitions, the first partition is
          initialized as the system storage, and the second partition is
          kept unformatted (to format it, select it in the file browser
          and press ENTER).
     - "Deinitialize System Storage": allows to deinitialize the system
       storage if it is already configured.
     - "Clear System Storage": deletes all data stored on the system
       storage. This, in particular, includes Blu-ray cache, main screen
       shortcuts, content of Internet Radio and IPTV folders.
     - "Clear Blu-ray Cache": clears Blu-ray cache (also known as "Blu-ray
       local storage").

* Added support for "Flash Memory Storage" - an area of main flash
 memory that can be used to store data instead of System Storage in some
 cases.
  - Flash Memory Storage currently can be used to store the following
    data:
     - Data cache for dune_folder.txt applications utilizing
       "icon_archive" function (graphics packages downloaded from
       Internet).
     - Data cache for KartinaTV application (graphics and some other
       information downloaded from Internet).
  - For all other kinds of data that can be stored in System Storage,
    Flash Memory Storage can not be used, and System Storage is still
    required. This includes, in particular: Blu-ray cache, main screen
    shortcuts, content of Internet Radio and IPTV folders.
  - In future, it is planned to allow to use Flash Memory Storage for more
    player functions.
  - The purpose of Flash Memory Storage is that it makes it easy to use
    the corresponding player functions for the users not having System
    Storage attached. When System Storage is available, Flash Memory
    Storare is not used (System Storage is used instead).
  - Flash Memory Storage availability and capacity depends on a particular
    Dune model.
     - Dune HD Max, Dune HD Duo: Flash Memory Storage is always available
       and its capacity is ~100MB (due to total 256MB of main flash memory
       in these models).
     - Dune HD Base 3.0, Dune BD Prime 3.0, Dune HD Smart D1/H1/B1: Flash
       Memory Storage can be enabled/disabled (disabled by default) and
       its capacity is ~16MB. Enabling Flash Memory Storage is performed
       automatically when it is needed for the first time, or can be
       performed manually via Setup. When Flash Memory Storage is enabled,
       some optional firmware components (asian fonts) are removed from
       the flash memory. When firmware is reinstalled/updated, Flash
       Memory Storage becomes disabled again and these optional firmware
       components are restored automatically (until Flash Memory Storage
       is required again by some application). If these optional firmware
       components are required, Flash Memory Storage can not be used
       (System Storage should be used instead).
     - Dune HD Lite 53D: Flash Memory Storage is always available and its
       capacity is ~16MB.
  - Setup section "Miscellaneous / System Storage" allows to see the
    current status of Flash Memory Storage and provides the following
    functions:
     - "Enable Flash Memory Storage": allows to enable Flash Memory
       Storage (only for Dune models where Flash Memory Storage option,
       other Dune models have Flash Memory Storage always enabled).
     - "Clear Flash Memory Storage": deletes all data from Flash Memory
       Storage.

* Improved "Reset Settings" function.
  - The confirmation dialog includes the information that player reboot
    will be performed.
  - Added clearing of all user-related data stored by the player in System
    Storage (including main screen shortcuts and cached icon archive
    data). NOTE: the content of Internet Radio and IPTV folders is not
    cleared automatically (since these folders may contain files important
    for the user); if needed, these folders can be cleared manually.
  - Added clearing of all data in Flash Memory Storage.

* Integrated "KartinaTV" Internet TV service.
  - More information: http://dune-hd.com/support/kartina_tv

* Integrated "IVI.ru" Internet Video service.
  - More information: http://dune-hd.com/support/ivi_ru

* Various other improvements.
  - The function of quick video mode choosing now provides feedback using
    the LED on the front panel of the player:
     - When the function is activated: the LED blinks once.
     - When the user cancels the function: the LED blinks once.
     - When a new video mode is chosen: the LED blinks 2 times.
     - When the user confirms the new video mode: the LED blinks 3 times.
  - Some interface languages added/updated.
  - Some other improvements/fixes.

* Includes also all changes from 101201_1626.

Version "101201_1626"
Download: N/A (has not been released for this player model, the listed changes are included into next firmware versions)
Changes since 100916_2027_beta:

* Various playback improvements.
  - Improved support for PGS subtitles during file playback.
  - Improved support for playback of very high bitrate MPEG TS/PS files
    and streams in specific cases.
  - Improved support for recording of audio-only TS streams (implemented
    more precise start of the recording).
  - Improved support for playback of audio-only TS files (added duration
    detection and current playback position indication).
  - Improved playback of Internet Radio streams.
  - Improved playback of MP3 audio files via UPnP.
  - Improved compatibility with some Internet Video services accessible
    via UPnP servers such as PlayOn Digital Media Server.
  - Bugfix: stopping MKV playback with enabled subtitles could lead to a
    crash in some cases.
  - Bugfix: specific files could not be played smoothly from network in
    some cases (the problem introduced in the firmware version
    100630_2131_beta).
  - Bugfix: switching between DVD chapters could cause audio problems (in
    bitstream mode) (the problem introduced in firmware version
    100916_2027_beta, because of a new Sigma SDK).
  - Bugfix: bitstream audio output did not work correctly on some Blu-ray
    discs in some cases (especially when 12-bit HDMI colorspace was used)
    (the problem introduced in firmware version 100916_2027_beta, because
    of a new Sigma SDK).
  - Bugfix: some user actions during playback of certain Blu-ray BD-J
    discs/images could cause green screen (the problem introduced in
    firmware version 100916_2027_beta, because of a new Sigma SDK).

* Added support to play background music during photo viewing.
  - Instruction: just launch a playlist consisting of both photos and
    audio files, e.g.:
     - Press PLAY on a folder containing photos and audio files.
     - Put .M3U playlist file with links (paths) to audio files into the
       folder with photos, press PLAY on this folder.
     - Press SELECT to manually mark photos / audio files (or folders with
       photos / audio files), and press PLAY. (Note: marking files works
       only within single parent folder.)
  - The following RC buttons are available for controlling background
    audio playback in photo viewer:
     - MUTE, V+/V-: mute and volume control.
     - PAUSE/PLAY: pause/resume audio.
     - NEXT/PREV: go to next/previous audio file.
     - REW/FWD: the same as NEXT/PREV.
     - NOTE: To navigate and pause/resume the photo slide show itself,
       LEFT/RIGHT/ENTER RC buttons can be used.
  - Notes:
     - Limitations: WMAPro audio file format is not supported for this
       feature; all other audio file formats should work (including MP3,
       FLAC, OGG, APE, WAV, WMA, etc).
     - All audio files are played sequentially (in the original order) in a
       loop.
     - Audio files using the same or compatible audio codec are played in
       gapless mode.

* Other photo viewer improvements.
  - ENTER RC button in photo viewer allows to pause/resume the slide show
    (and LEFT/RIGHT, as before, allow to go to next/previous photo).
  - Bugfix: specific huge panorama photos were handled wrongly in photo
    viewer.
  - Bugfix: photo viewer could crash in specific rare cases.

* Added support to play music w/o using TV, using the front panel display.
  - The name of the currently selected item of the file browser (e.g.
    file/folder) is shown on the display.
  - When playback of a file/audiotrack starts, its title is shown on the
    display for a few seconds.
  - The currently selected playlist item (when playlist browser is
    activated by pressing POP UP MENU RC button during playback) is shown
    on the display.
  - Long names/titles are scrolled through the display.
  - The new features can be disabled via settings in "Setup /
    Miscellaneous / Built-in Display".

* Added support for ALAC (Apple Lossless) audio files.

* Added support for WavPack lossless audio files.

* Added 24/50 and 24/60 autoframerate modes.

* Added "dynamic range control" support.
  - Added "Setup / Audio / Dynamic Range Control" setting, with possible
    values "Off", "Medium", "High", "Auto". Allows to specify the desired
    DRC behavior for audio tracks supporting DRC.

* Volume control improvements.
  - New graphical volume indicator during file and DVD playback, with a
    special warning (red color) about possible overload (volume level more
    than 0dB).

* Zoom improvements.
  - Added a new zoom preset for file playback: "full fill screen" --
    similar to "fill screen" but with filling the entire screen both
    vertically and horizontally.
  - Bugfix: remembering zoom settings could work wrongly in some cases.

* Blu-ray INFO OSD improvements.
  - Added showing of the total playback time in INFO OSD during Blu-ray
    playback.
  - Added showing the information about secondary video and secondary
    audio tracks in INFO OSD during Blu-ray playback; some other related
    changes/improvements.

* Improved handling of RC buttons during playback.
  - CLEAR RC button allows to restore the default vertical position of
    subtitles in subtitles setup mode.

* Improved handling of RC buttons in file browser.
  - PREV and NEXT RC buttons are handled as P+/P- in file browser (allow
    to switch to next/previous page in large directory listings) (the
    feature requested by some users of universal remotes).
  - Added a possibility to quickly toggle interface language: AUDIO RC
    button on the main screen shows a dialog for choosing the language.

* Improved handling of front panel buttons in file browser.
  - PREV and NEXT front panel buttons now allow to navigate both when icon
    view is used (handled as LEFT and RIGHT, with ability to go from one
    row to another) and when list view is used (handled as UP and DOWN).

* Added support for Hebrew (Right-to-Left) filenames.

* Added clock on front panel display in standby.
  - Clock is shown automatically when time is synchronized (i.e. time
    synchronization option is enabled and Internet connection is working,
    or a time server in the local network is used); when time is not
    synchronized, clock is not shown.
  - NOTE: Time synchronization is automatically enabled after upgrade to
    this firmware version. If not needed/desired, it can be disabled via
    "Setup / Miscellaneous / Time synchronization".
  - Clock is shown in "software standby" mode only.
  - Clock showing can be disabled via "Setup / Miscellaneous / Built-in
    Display / Show time on display".

* Added new UI customization possibilities (for "dune_folder.txt"
 applications).
  - Added dune_folder.txt feature: possibility to specify the default
    sorting settings for the folder. Syntax:
     - sort_field = name|size|atime|mtime|unsorted
     - sort_dir = asc|desc
  - Added dune_folder.txt feature: paths in the definition of virtual
    items can be relative paths.
  - Image/icon files can now have also special extensions .djpg, .dbmp,
    .dpng (helpful e.g. to allow Movie Collections PC applications to
    prevent indexing of the files by OS for better performance).

* Various DVB-T improvements.
  - Included a newer improved version of DVB-T drivers, which improve
    DVB-T reception quality and fix some problems.
  - Improved support for national characters in DVB-T channel names.
  - Added a possibility to use DVB-T w/o system storage (support for nice
    channel icons is disabled in this case).
  - Added a possibility to specify the location (country and city) when
    scanning for the channels (speeds up the scanning process and also may
    improve the results of the scanning). The location can also be
    specified in Setup / Applications / DVB-T.
  - Added showing of progress information during scanning and a
    possibility to stop the scan process.
  - Added a possibility to launch the scan also from the settings page
    (Setup / Applications / DVB-T).

* Torrent client improvements.
  - Maximum number of torrent client peers is set to 50 by default (to
    prevent problems taking place in some cases, as reported by some
    users).
  - More correct reporting of errors by torrent client in some cases.
  - Bugfix: torrent client did not support working with partition-less
    storage devices.

* Network setup improvements.
  - Added a new network configuration mode: "Auto (DHCP), manual DNS",
    allowing to use DHCP for automatic configuration of basic network
    settings, but specify DNS settings manually (as needed for some
    Internet providers).
  - Improved indication when the player is waiting for IP address.

* WiFi setup improvements.
  - Added an ability to choose WiFi network from the list.
     - Setup / Network / (WiFi) Settings -> Scan for networks...
  - Added autodetection of the best possible WiFi security method when
    choosing WiFi network from the list.
  - WiFi password is shown as normal text to make it easier to
    enter/validate it.

* Added PPPoE support.
  - Added PPPoE network connection kind (i.e.: Dune connected via Ethernet
    cable directly to an Internet provider which uses PPPoE connection,
    with login/password-based authorization).

* Added SMB server settings (Setup / Applications / SMB Server).
  - Server name.
  - Workgroup name.
  - Server description.
  - Ability to disable SMB server.

* Time zone setup improvements.
  - Time zone configuration (Setup / General / Time zone) is made more
    convenient: for each listed time zone, the current time taking place
    according to this time zone is shown.

* Added built-in "Reset Settings" function.
  - No more need to use a DSF file for this.
  - Usage: "Setup / General / Reset Settings".
  - Resets all player settings to default values and also clears all other
    user-related data stored by the player in main flash memory (such as:
    file/DVD bookmarks, configuration of network folders, etc).
  - Also clears Blu-ray cache (also known as Blu-ray local storage) in
    System Storage (when System Storage is attached).

* Various other improvements.
  - Changed indication of "AC3" and "EAC3" audio tracks to "Dolby Digital"
    and "Dolby Digital Plus" (as required by Dolby).
  - Bugfix: pressing POP UP MENU on main screen shortcuts pointing to a
    non-accessible network resource could cause a lockup for several
    minutes.
  - Other minor fixes.

[skank1]

 Added support to play music w/o using TV, using the front panel display.
   - The name of the currently selected item of the file browser (e.g.
     file/folder) is shown on the display.
   - When playback of a file/audiotrack starts, its title is shown on the
     display for a few seconds.
   - The currently selected playlist item (when playlist browser is
     activated by pressing POP UP MENU RC button during playback) is shown
     on the display.
   - Long names/titles are scrolled through the display.
   - The new features can be disabled via settings in "Setup /
     Miscellaneous / Built-in Display".


Super  :cheers:  Theeft misschien lang geduurd eer er een update kwam, maar nu is het wel een grote !

[skank1]

 Added new UI customization possibilities (for "dune_folder.txt"
  applications).
   - Added dune_folder.txt feature: possibility to specify the default
     sorting settings for the folder. Syntax:
      - sort_field = name|size|atime|mtime|unsorted
      - sort_dir = asc|desc
   - Added dune_folder.txt feature: paths in the definition of virtual
     items can be relative paths.
   - Image/icon files can now have also special extensions .djpg, .dbmp,
     .dpng (helpful e.g. to allow Movie Collections PC applications to
     prevent indexing of the files by OS for better performance).
   - Added a possibility to load icons shown in the right panel of the
     "extended list view" asynchronously. When this feature is enabled,
     navigation in such folders becomes much faster.
      - Syntax:
         - async_icon_loading = yes
   - Added "icon_archive" feature, allowing to download a collection of
     icons/images from an HTTP server once when entering certain folder,
     and cache it in the player (in System Storage), that allows to
     significantly improve the performance.
      - Syntax:
         - icon_archive.{n}.name = {name}
         - icon_archive.{n}.url = {HTTP-URL-to-TGZ-archive}
         - icon_path = icon_archive://{name}/{file-path-in-archive}
      - When a new version of the icon archive is deployed on the HTTP
        server, a modified URL should be used for it, then the player will
        automatically reload the icon archive next time when the user opens
        the folder.


Wat betekent dit nu concreet voor het aanpassen?
Is er een manier om toch zelf iconen te gebruiken nu ? eventueel vanaf system storage? of heb ik het mis?

[frankp]

Geweldige update, jammer dat ik het (nog) niet kan testen.
De allerbelangrijkste update: Gapless audio playback 

@Skank
Volgens mij kan je met die nieuwe feature alleen maar icons laden vanaf een externe locatie. Het lijkt erop
dat je nog niks kan veranderen aan het home screen.

[skank1]

Geweldige update, jammer dat ik het (nog) niet kan testen.
De allerbelangrijkste update: Gapless audio playback 

@Skank
Volgens mij kan je met die nieuwe feature alleen maar icons laden vanaf een externe locatie. Het lijkt erop
dat je nog niks kan veranderen aan het home screen.

Dat zou ook mooi zijn als dat zou werken, nu werkt het niet... bij mij althans niet (met user shares)
Overigens snap ik niet wat ze bedoelen met:
Added a possibility to load icons shown in the right panel of the
     "extended list view" asynchronously

[frankp]

Bedoelen ze daar misschien dit mee?

[skank1]

Misschien

[Dirc]

Include deze de functies van onderstaande firmware???

dune_firmware_hdbase3_101203_2124_test

omdat ik dit zie in de release note:

Added IP Control possibilities (control the player from iPhone etc).
   - A simple HTTP protocol allows to control the player from network
     (start/stop playback of the given media resources, control the
     playback, check current player status, emulate RC button presses,
     etc).
   - Applications for various devices can be created based on this IP
     Control procotol. Several such applications are already announced /
     provided (e.g.: applications for iPhone/iPad, integration with
     Control4 smart home systems).
   - More information: http://dune-hd.com/support/ip_control

Wat ik ook afvraag is of deze weer de audio problemen heeft bij DVD weergave.

[skank1]

Include deze de functies van onderstaande firmware???

dune_firmware_hdbase3_101203_2124_test

omdat ik dit zie in de release note:

Wat ik ook afvraag is of deze weer de audio problemen heeft bij DVD weergave.

ja en nee
kan je ook zien in de ganse lijst

[Dirc]

Ik zal m er eens op smijten.

[1969mach1]

Net de nieuwste versie op de max gezet.
Browsen via het display gaat perfect, echt heel blij mee!
Muziek afspelen zonder de 2sec tussenpauze is me nog niet gelukt.

[skank1]

Net de nieuwste versie op de max gezet.
Browsen via het display gaat perfect, echt heel blij mee!
Muziek afspelen zonder de 2sec tussenpauze is me nog niet gelukt.

Dus de tv hoeft niet meer aan?
Hoe maak je zo je keuze op je beginscherm vraag ik mij dan af...

[Dirc]

Dune RC op de iPhone werkt ook nog prima via Ip control.

[1969mach1]

Dus de tv hoeft niet meer aan?
Hoe maak je zo je keuze op je beginscherm vraag ik mij dan af...

De tv hoeft niet meer aan.
Je krijgt eerst de beschikbare media op het display te zien, bijvoorbeeld USB.
Je ziet de mappen per stuk weergegeven op je display.
Wel even zoeken, want het is niet abcd, maar van boven naar beneden en links naar rechts (zoals de mappen op je tv worden weergegeven).

Als je een map hebt met veel liedjes kun je ze zo op shuffle zetten:
druk op play, popup menu, 8, popup menu.

Updaten via het menu van de dune werkt ook prachtig moet ik zeggen.

[skank1]

Morgen dringend eens testen
Zo komt de dune wel in het  gebied van de squuezebox terecht

[Nescio1967]

Morgen dringend eens testen
Zo komt de dune wel in het  gebied van de squuezebox terecht

Als de audio kwaliteit nou ook nog hetzelfde is ben ik helemaal blij! 

[Kingpin]

Als de audio kwaliteit nou ook nog hetzelfde is ben ik helemaal blij!  

Nou die is denk ik wel beter dan de Squeezebox (die geen 24/192 ondersteunt). Daarnaast heb ik beide en tot 24/48 geen verschil waarneembaar (wel achter aparte dac uiteraard, analoog uit kan ik geen uitspraak over doen).
Maar wat een update zeg, erg mooi, wordt almaar beter en ook nog met FlashLite support, ow dat wordt grandioos straks.
Me Happy  

Enigste wat ik nog niet heb kunnen vinden is of je via de dune_folder.txt de font color kunt wijzigen?