Het grote Dune HD SOLO 4K Topic

[EricR]

Je eerste 4 vragen kan ik met ja beantwoorden. Ik heb wel degelijk een Solo4K. Het betreft mkv bestanden maar ook iso's. Ik gebruik dus een Nas van Qnap de TS219P.
Wat bedoel je met 'welk protocol'. De laatste firmware staat op de dune.
Het indexeren lukt allemaal wel. Ik krijg gewoon die covers etc. te zien en als ik daarop klik krijg ik ook gewoon netjes de film info etc. Echter zodra ik dus afspelen kies zegt ie dat de afspeellijst leeg is. Echt heel vreemd.

Ik bedoel het netwerkprotocol dat je gebruikt voor de NAS (SMB, NFS).
Vorige week heb ik je PM's gestuurd met instructies, heb je deze gezien?

[EricR]

IP Control vraagje (bug?)

Ik stuur mijn Dune's aan middels IP control. Op de oude 3.0 geeft ik het commando

http://"MIJN IPadres"/cgi-bin/do?set_playback_state&speed=256&position="tijd" (waarbij "Mijn IPadres" en "tijd" natuurlijk de juiste getallen zijn)

de Dune 3.0 gaat dan vanaf dat moment de file afspelen. Dit werkt bij alle soorten files (BR, mkv, dvd...)
De Solo 4K pakt dit commando niet op? Is dit een bug of moet het commando anders worden geformuleerd?

EricR???

Zelf heb ik nooit met IP Control gewerkt dus ik heb je vraag doorgezet naar Dune, heb je dit getest met simpele videobestanden, BD's of DVD's?

[Mausman]

Ik bedoel het netwerkprotocol dat je gebruikt voor de NAS (SMB, NFS).
Vorige week heb ik je PM's gestuurd met instructies, heb je deze gezien?

Aha, ok. Ik gebruik NFS als netwerkprotocol.

Ja ik heb 2 emailtjes van je ontvangen, echter nog geen tijd gehad om er naar te kijken. Hopelijk een dezer dagen zal ik even kijken.
Je hoort van me.

[riwi]

IP Control vraagje (bug?)

Ik stuur mijn Dune's aan middels IP control. Op de oude 3.0 geeft ik het commando

http://"MIJN IPadres"/cgi-bin/do?set_playback_state&speed=256&position="tijd" (waarbij "Mijn IPadres" en "tijd" natuurlijk de juiste getallen zijn)

de Dune 3.0 gaat dan vanaf dat moment de file afspelen. Dit werkt bij alle soorten files (BR, mkv, dvd...)
De Solo 4K pakt dit commando niet op? Is dit een bug of moet het commando anders worden geformuleerd?

Als ik dat op mijn solo 4k probeer zie ik :
http://192.168.1.74/cgi-bin/do?cmd=set_playback_state&speed=256&position=0

Code [Selecteer] Expand


<command_result>
<param name="protocol_version" value="4"/>
<param name="command_status" value="ok"/>
<param name="player_state" value="osd_screen"/>
<param name="playback_state" value="playing"/>
<param name="previous_playback_state" value="buffering"/>
<param name="last_playback_event" value="no_event"/>
<param name="playback_url" value="/tmp/mnt/network/0/temp/marvels_shield_s4/Marvels.Agents.of.S.H.I.E.L.D.S04E01.The.Ghost.1080p.WEB-DL.DD5.1.H.264-AG.mkv"/>
<param name="playback_speed" value="256"/>
<param name="playback_duration" value="2581"/>
<param name="playback_position" value="34"/>
<param name="playback_current_bitrate" value="-1"/>
<param name="playback_is_buffering" value="0"/>
<param name="playback_volume" value="100"/>
<param name="playback_mute" value="0"/>
<param name="playback_video_width" value="1920"/>
<param name="playback_video_height" value="1080"/>
<param name="audio_track" value="0"/>
<param name="subtitles_track" value="-1"/>
<param name="playback_window_fullscreen" value="1"/>
<param name="playback_window_rect_x" value="-1"/>
<param name="playback_window_rect_y" value="-1"/>
<param name="playback_window_rect_width" value="-1"/>
<param name="playback_window_rect_height" value="-1"/>
<param name="playback_clip_rect_x" value="-1"/>
<param name="playback_clip_rect_y" value="-1"/>
<param name="playback_clip_rect_width" value="-1"/>
<param name="playback_clip_rect_height" value="-1"/>
<param name="playback_video_source_rect_x" value="-1"/>
<param name="playback_video_source_rect_y" value="-1"/>
<param name="playback_video_source_rect_width" value="-1"/>
<param name="playback_video_source_rect_height" value="-1"/>
<param name="osd_width" value="1920"/>
<param name="osd_height" value="1080"/>
<param name="video_enabled" value="1"/>
<param name="video_on_top" value="0"/>
<param name="video_zoom" value="normal"/>
<param name="pause_is_available" value="1"/>
<param name="teletext_available" value="0"/>
<param name="teletext_enabled" value="0"/>
<param name="teletext_mix_mode" value="0"/>
<param name="teletext_page_number" value="-1"/>
<param name="scrambling_detected" value="0"/>
<param name="hangup_watchdog_activations" value="0"/>
<param name="hls_first_sequence" value="-1"/>
<param name="segment_length" value="-1"/>
<param name="audio_track.0.lang" value="eng"/>
<param name="audio_track.0.codec" value="Dolby Digital"/>
<param name="audio_track.0.type" value="normal"/>
<param name="subtitles_track.0.lang" value="eng"/>
<param name="subtitles_track.0.pid" value="8193"/>
<param name="subtitles_track.0.codec" value=""/>
<param name="subtitles_track.0.type" value="normal"/>
<param name="pltv_enabled" value="0"/>
<param name="pip_zorder" value="400"/>
<param name="video_zorder" value="200"/>
<param name="osd_zorder" value="500"/>
</command_result>


Ik heb het ook op de base3D en de base 3.0 getest. Beide werken ook maar rapporteren protocol_version 3 terug.
Er moet wel al een file spelen anders klaagt ie dat de speler in "navigator" mode is. Ik dacht even dat ie de file onder de cursor wel zou pakken als je geen media_resource opgeeft. Datzelfde doen de base3d en de base3.0 ook (dus terug naar positie 0 als er al een file speelt).

Wat is de error code die je ziet als je het commando in een browser opgeeft?

Moet je niet eerst de file starten?

==== Start playback of media_url with media kind autodetect (file/DVD/BD) ====

http://10.0.0.1/cgi-bin/do?
cmd=launch_media_url&media_url=nfs://10.0.0.1:/VideoStorage:/SomeFolder/file.mkv

http://10.0.0.1/cgi-bin/do?
cmd=launch_media_url&media_url=smb://10.0.0.1/VideoStorage/SomeFolder/DVDFolder

http://10.0.0.1/cgi-bin/do?
cmd=launch_media_url&media_url=nfs://10.0.0.1:/VideoStorage:/SomeFolder/bluray_image.iso

[xynyx]

het is een bestaand script dat goed werkte op de 3.0
Tijdens het afspelen ga je met een slider naar de gewenste positie. Op moment van loslaten van de sliderknop, wordt het play commando geactiveerd.
Ik zat een blu-ray file te kijken en daarbij wilde de Solo niet afspelen op het moment van loslaten van de knop. Hij ging weer verder vanwaar hij was gebleven voordat de slider was geactiveerd. Ik zal er eens wat verder induiken. Wellicht dat de feedback is veranderd???

Riwi, Ericr bedankt voor jullie hulp in deze! Ik kom erop terug.

[riwi]

Ik kan het vanavond nog eens proberen met een position > 0. Ik wist de format niet van deze waarde dus ik had 0 gekozen. Ik neem aan dat je 00:30:00 kan opgeven om naar de positie 30 minuten na het begin te springen.

[xynyx]

Hier een debugging script:
12:00:54> SCRIPT: SLIDER RELEASED++++++++++++++++++++++++++++
12:00:54> SCRIPT: SLIDERCOMMAND:cgi-bin/do?cmd=set_playback_state&speed=256&position=2320
12:00:54> CINnwplayer matched feedback CINnwplayer_Feedback
12:00:54> SCRIPT: Feedback received: <?xml version="1.0" ?>
<command_result>
<param name="protocol_version" value="4"/>
<param name="command_status" value="ok"/>
<param name="player_state" value="dvd_playback"/>
<param name="playback_speed" value="256"/>
<param name="playback_duration" value="6059"/>
<param name="playback_position" value="469"/>
<param name="pip_zorder" value="400"/>
<param name="video_zorder" value="200"/>
<param name="osd_zorder" value="500"/>
</command_result>

Note:
Commanfusion zorgt voor de http en IP/poort in de command structuur. Die zie je dus niet in het script. Neem maar aan dat dat gewoon goed werkt.

Je ziet dat de slider wordt losgelaten op positie 2320 en dat het play command vanaf die positie wordt gegeven.
In de feedback zie je position: 469. Dit zou dus 2320 moeten zijn. 469 is de "oude" positie.
Protocol is versie 4 blijkbaar,

Deze test was met een DVD file. De oude positie wordt dus wederom hervat ECHTER de speler slaat dan ook direct in de pauze stand.
Er zit echt iets niet goed. Nogmaals bij de "oude" Dunes loopt dit gewoon goed voor alle files (BR, DVD,MKV...)

Riwi,
Positie waarde is aantal in seconden. Hartstikke fijn dat je wil meedenken!!!

EricR,
Ben zeer benieuwd wat Dune hierop te zeggen heeft. Ik krijg sterk het gevoel dat protocol versie 4 een bugje heeft.

[EricR]

IP Control vraagje (bug?)

Ik stuur mijn Dune's aan middels IP control. Op de oude 3.0 geeft ik het commando

http://"MIJN IPadres"/cgi-bin/do?set_playback_state&speed=256&position="tijd" (waarbij "Mijn IPadres" en "tijd" natuurlijk de juiste getallen zijn)

de Dune 3.0 gaat dan vanaf dat moment de file afspelen. Dit werkt bij alle soorten files (BR, mkv, dvd...)
De Solo 4K pakt dit commando niet op? Is dit een bug of moet het commando anders worden geformuleerd?

EricR???

Deze command werkt momenteel inderdaad niet voor FullBD modus ivm beperkingen van de FullBD engine, hier zal in de toekomst aan worden gewerkt.

[xynyx]

EricR,

Bedankt!
Blijkbaar bij DVD playback ook niet......

[master30]

Komt er nog een verbeterde versie uit van de Solo met 2 hdmi uitgangen?

[riwi]

EricR,

Bedankt!
Blijkbaar bij DVD playback ook niet......

Bij mkv werkt het wel goed. Zo springt ie direct naar het 30 minuten punt.
http://192.168.1.74/cgi-bin/do?cmd=set_playback_state&speed=256&position=1800

[maximus79]

Vandaag in de aanbieding bij one day fly,

Hoe is deze in vergelijk de D1 met beeld en geluid?

[TopGun2010]

Vandaag voor 280.- op 1DF

*sorry, zie net het bericht van Maximus

Volgens mij kan dit apparaat maximaal 4k30 afspelen.

[EricR]

De Solo4K bevat een nieuwere, doorontwikkelde Sigma chip die betere videoprestaties levert. Daarnaast ondersteund hij meer audio- en videoformaten en hij kan hij 4K materiaal afspelen.
Naast de verbeteringen in audio en video beschikt hij over AC Wi-Fi, Gigabit ethernet, Z-Wave en ik vergeet vast nog het eea.

[maximus79]

Thanx, jammer van de 1.4 hdmi

[BeeBeeEight]

Want? Heb je al content die dat nodig heeft dan? Misschien een demo filmpje hier of daar maar meer is er niet voorlopig.

[maximus79]

Daar heb jij weer gelijk in.

[BeeBeeEight]

Dat ze er beter meteen 2.0 op hadden kunnen zetten is natuurlijk ook wel een goed punt

[maximus79]

Toch maar besteld, heb sowieso een zwak voor dune....

[BeeBeeEight]

Hier ook maar besteld bij 1df. Mijn Dune Prime 3.0 gaat al zo lang mee... het is wel eens tijd voor de next generation

[TopGun2010]

Werkt de videowall bij Dune vergelijkbaar als Kodi of is het minder informatief en minder snel?

[Harry HT]

Hi,

Vandaag kwam ik nieuwe beta firmware tegen. 

Heeft iemand deze al getest?

Gegroet,

Harry

https://dune-hd.com/eng/support/firmware_zone/48

Changes since 160831_0240_r11:

- New feature: The new "Recent" menu added to the main menu. It lists the
  recently played media items (media files or movies from My Collection).
   - This "Recent" menu can also be quickly accessed by pressing "RECENT"
     RC button (available on the RC versions shipped with Solo 4K and Solo
     Lite models); when using the older RC versions w/o "RECENT" RC button
     but with "DUNE" RC button, "DUNE" RC button can also be used.
   - Up to 1000 recent files are shown.
   - Only files which were played for at least 10 seconds are shown.
   - For each file, the last playback progress/position (where the playback
     stopped) is shown. (NOTE: not yet available for FullBD and DVD
     playback modes.)
   - If the file is part of My Collection, the corresponding movie title
     with movie poster is shown in the list.
   - If the file is an episode of a TV series from My Collection, the
     information about the season/episode number is shown in the list; only
     the latest played episode is shown for each TV series.
   - Pressing "ENTER" on a file opens the file in context of its parent
     folder. Pressing "ENTER" again launches the file playback (the last
     playback position is automatically resumed, when technically
     supported).
   - "POP UP MENU" menu allows to remove individual items from the recent
     list ("Clear" action) or clear all items ("Clear all" action).
   - NOTE: The following features are not implemented yet, but are planned
     for future firmware updates:
      - Indicating recent items in My Collection and file browser.
      - Indicating playback progress for files played in FullBD/DVD modes.
      - Opening My Collection UI for files which are part of My Collection.
      - Quick play function by "PLAY" RC button.
      - Providing access to other kinds of recently played items (such as
        online content played via various plugins).
      - Other improvements.

- New feature: The new "Movies" menu added to the main menu. It allows
  browsing the entire database of all movies and TV series (including the
  movies which are not part of My Collection).
   - Movies can be filtered by genres.
   - Movies can be searched by movie title.
   - The movies are sorted in a way to show first both the most popular and
     the most recent movies.
   - For each movie, the same detailed information is provided, as for
     movies in My Collection, including movie poster, fanart background
     images, movie description, cast and crew photos, descriptions,
     filmography.
   - The cast and crew explorer allows to navigate from movie to movie the
     same way as in My Collection.
   - If a movie is a part of My Collection, it can be immediately played
     same way as in My Collection.

- New feature: YouTube movie trailers (and other YouTube video clips
  corresponding to the movie) are now available for all movies in the new
  "Movies" menu and for all movies in My Collection.
   - The movie trailers are listed in the new "Trailers" section on the
     movie screen.
   - Other video clips corresponding to the movie (when available) are
     listed in the new "Add.materials" section on the movie screen.
   - For each video clip, the title and the video resolution is shown.
   - Video clips with up to 1080p video resolution are supported.
   - Video clips in all available languages are shown.
   - Video clips in the user's language (according to "Interface language"
     setting) are shown first.
   - NOTE: Press "ENTER" during video clip playback to choose another video
     clip or navigate to other stuff (just like when playing any other
     video content).
   - NOTE: For movies which are part of My Collection, reindexing is
     required in order to enable YouTube video clips for these movies.

- New feature: My Collection: video files representing trailers and
  additional materials are now listed separately from the video files
  respresenting the movie itself, in the corresponding new sections
  ("Trailers" and "Add.materials") on the movie screen.

- New feature: My Collection: during indexing, episode titles are
  automatically extracted from filenames (when present in the filenames)
  and then shown in the UI.

- New feature: My Collection: an external storage device (configured as
  System Storage) can be used to store the internal My Collection data and
  caches (such as downloaded and cached images).
   - When System Storage is available, it is used automatically during
     indexing; when it is not available, the internal Flash Memory Storage
     is used as before.
   - When starting using System Storage, the data and caches which were
     previously stored in the internal Flash Memory Storage are preserved.
   - The new "My Collection / Collection Management / Data storage" menu
     allows to check if internal flash memory storage or System Storage is
     currently used for My Collection, and to check for the free storage
     space.
   - To configure System Storage, use "Setup / Misc / System Storage" menu.
   - Also see: http://dune-hd.com/support/usb_flash_drive
   - NOTE: When using My Collection function, it is highly recommended to
     use as fast storage device as System Storage as possible. The
     preference is:
      - 1) An internal SSD-based SATA HDD.
      - 2) An internal regular SATA HDD.
      - 3) A fast USB flash drive (typically it should be a modern USB 3.0 flash
        drive).
   - NOTE: Typical regular USB flash drives are often rather slow and using
     them as System Storage can cause significant slowdowns of My
     Collection indexing operation, and reduced responsiveness of My
     Collection UI; if this takes place, consider the use of faster storage
     device for System Storage.

- New feature: My Collection: when indexing a big collection of movies, and
  the free space in the used storage device (internal Flash Memory Storage,
  or external System Storage) is not enough to store all the required data
  and caches, or no free space remains after the indexing operation, the
  corresponding warning is shown on the "Manage folder" screen.

- New feature: My Collection: the new settings "Store movie posters",
  "Store fan art" and "Store photo" (in "My Collection / Collection
  Management / Data storage" menu) allow to control if to download and
  cache in the flash memory movie posters, fan art images and person photos
  during the indexing operation.
   - When set to "no", the corresponding images are not downloaded and
     cached in the flash memory (and will be fetched online when browsing
     the UI), which makes the indexing faster and reduces the amount of the
     used flash memory space.
   - When set to "yes", the corresponding images are downloaded and cached
     in the flash memory, which makes the indexing slower and requires
     additional space in the flash memory, but avoids the need to fetch the
     images online when browsing the UI.
   - The default is "yes" for all settings.
   - NOTE: In the previous firmware versions, default was not to download
     person photos; downloading person photos could take noticeable
     additional time during indexing; if this not desired, you can disable
     "Store photo" setting.
   - NOTE: Person photos are downloaded only for a few first persons of
     each movie.

- New feature: 3D rendering of subtitles and OSD.
   - Implemented for all playback modes (regular files, BDLite, FullBD).
   - Implemented for all 3D video modes (SBS/TNB, BD3D).
   - The new setting "Playback / Preferences / 3D depth for OSD" allows to
     adjust 3D depth of subtitles and OSD.

- New feature: New renderer for ASS/SSA subtitles with full support for
  ASS/SSA format (including positioning, font size, colors, various
  effects).
   - The new setting "Playback / Subtitles / Enhanced SSA/ASS rendering"
     allows to adjust if TV overscan area should be taken account or not,
     and to disable the new renderer (i.e. enable the old plain text
     renderer).
   - The default is the new renderer.

- New feature: New renderer for plain text subtitles based on TTF fonts.
   - The new setting "Playback / Subtitles / Text subtitles font type"
     allows to switch between the new renderer (TTF) and the old renderer
     (based on Dune proprietary font format).
   - The default is the new renderer.

- New feature: Ability to choose TTF font for subtitles, with two fonts
  (Light and Regular) preincluded, and ability to install custom TTF fonts.
   - Available via the new setting "Playback / Subtitles / Text subtitles
     TTF font".
   - The default is "Regular".
   - To install a custom TTF font, launch ".ttf" file in the file browser.

- New feature: Ability to choose TTF font for the advanced parts of UI
  which use TTF fonts (such as Movie screen in My Collection function),
  with two fonts (Light and Regular) preincluded, and ability to install
  custom TTF fonts.
   - Available via the new setting "Playback / Subtitles / UI TTF font".
   - The default is "Light".
   - To install a custom TTF font, launch ".ttf" file in the file browser.

- New feature: Automatic detection of text subtitles encoding for Korean
  language (automatic switch between EUC-KR and Unicode encodings).

- New feature: Automatic detection of text subtitles encoding for Chinese
  language (traditional and simplified) (automatic switch between GB231,
  BIG5 and Unicode encodings).

- New feature: Support for playback of PCM audio streams via HTTP (streamed
  PCM WAV), useful for some integrations.

- Improvement: My Collection: posters, photos and background images are
  loaded faster and more effeciently; UI responsiveness during background
  image loading is improved.

- Improvement: My Collection: when starting more than 3 indexing operations
  in the parallel, only 3 indexing operations are really executed in the
  parallel, with other operations waiting in the queue and executed
  sequentially. This helps to prevent too big load on the player which may
  cause UI stuttering.

- Improvement: My Collection: indexing: improved handling of file and
  folder names in specific cases.

- Improvement: My Collection: indexing: improved handling of TV series
  episodes when recognizing video files by their fingerprints.

- Improvement: My Collection: when waiting for long operations, "Please
  wait..." message is shown instead of often misleading "Connecting...".

- Improvement: When formatting System Storage, more optimal formatting
  options are used to allow to store bigger number of files even on not
  very big partitions. (Previously, installing too many plugins or storing
  too many files could cause "No space left on device" errors even when
  only a small part of System Storage was actually used.)
   - NOTE: If you encounter such a problem, or if you plan to use System
     Storage for My Collection and your collection is rather big, it is
     recommended to reformat and reinitialize System Storage.

- Improvement: When initializing System Storage, not only an empty
  formatted partition can be used, but also an unformatted partition, or an
  empty partition containing only some empty system folders.

- Improvement: When a network folder is renamed, the references to this
  network folder and the media content in this snetwork folder (in
  "Favorites" menu, in "My Collection" function, in "Recent" menu) are
  preserved and continue to work correctly. (Internally, each network
  folder is now assigned an internal persistent ID.)

- Improvement: All arrow RC buttons (LEFT/RIGHT and UP/DOWN) now by default
  trigger visual time seek operation when playing seekable media content.
   - The new setting "Playback / Control / LEFT/RIGHT buttons" allows to
     adjust the behavior of LEFT/RIGHT buttons, with possible options "Time
     seek" (the new default), "Volume control", "Choose function via
     SELECT" (corresponds to the old behavior).
   - The new setting "Playback / Control / UP/DOWN buttons" allows to
     adjust the behavior of UP/DOWN buttons, with possible options "Time
     seek" (the new default) and "Switch channels/files" (corresponds to
     the old behavior, also available with PREV/NEXT RC buttons).

- Improvement: Added several improvements and fixes for Kartina.TV
  application (fix for possible server interaction failure, avoiding
  unneeded rebuffering when playback position was not actually changed
  during seek operation, improved cursor position after switching to the
  previous/next day in the EPG, sync with the latest changes in the server
  API).

- Improvement: More correct handling of errors when plaing media streams
  via RTSP protocol.

- Improvement: More optimized CPU usage when plaing media streams via RTSP
  protocol.

- Fixed: My Collection: it was impossible to play a TV series episode when
  the episode was a BD or DVD image.

- Fixed: My Collection: "Add to My Collection" function did not work in
  some cases for folders on SMB shares.

- Fixed: My Collection: indexing: wrong indexing status could be reported
  in some cases after switching the player off or rebooting the player in
  other ways.

- Fixed: My Collection: the UI for manual editing associations between
  files and movies did not work correctly in some specific rare cases.

- Fixed: My Collection: minor other fixes for specific use cases.

- Fixed: FullBD: When playing trimmed BD images, the function of automatic
  resuming last playback position worked wrongly in some cases (different
  BD images were not distinguished properly from each other).

- Fixed: FullBD: When HDMI 3D support is disabled in player settings, BD3D
  discs still wrongly assumed that 3D is available.

- Fixed: When playing AC3 audio tracks in AVI or MKV container in audio
  bitstream mode, various problems (such as A/V desync or disappearing
  audio) could happen in some cases.

- Fixed: When playing MKV files, wrongly declared AAC audio tracks were not
  recognized in some cases.

- Fixed: Playback of MPEG-TS files/streams with DVB subtitles could crash
  in some cases.

- Fixed: Some exotic FLAC files could not be played.

- Fixed: PAL sound speed correction function did not work correctly in some
  cases.

- Fixed: VXP demo mode did not work properly.

- Fixed: DVB-C scan/playback did not work properly in some DVB-C networks.

- Fixed: When pressing "ENTER" RC button (to show the main menu) while the
  buffering was in progress, the playback could hang in some specific
  cases.

- Fixed: When toggling the main menu showing during the playback (via "TOP
  MENU" RC button or in other ways), and then stopping the playback, the
  playback could hang in some specific cases.

- Fixed: When using the time search function (enter HH:MM:SS time
  position), the custor was displayed at a wrong location.

- Fixed: HDD spindown did not work correctly in some cases when entering
  standby mode.

- Fixed: SoloLite: Wi-Fi access point setup menu wrongly allowed to choose
  unsupported 5.0 GHz mode (which is supported by Solo4K only).

- Updated/improved UI translations.

- Various other minor improvements/fixes.

[RonG]

Zozo mooie lijst met fixes en updates,

New feature: 3D rendering of subtitles and OSD.

Ben benieuwd, straks eens testen

[Raymen]

hij gaat er nu op

EN DE 3D SUBS DOEN HET, EN ZE DOEN HET GOED

hier zaten we op te wachten, dank u dune

ook zijn er 2 icoontjhes toegevoegd movies en recent, die functie heeft niet echt nut vindt ik

[RonG]

Hmmm, ik krijg de subs geheel niet meer geactiveerd . Bv Avatar, had ik eerst 2D gele subs, nu niks meer. Ook kan ik geen audio track meer wisselen zoals ook de info oproepen werkt niet meer. Lijk alsof er bepaalde knoppen op de AB niet meer werken in 3D

Wanneer ik een 2D film speel werkt alles wel.