Versie 2.1D released.

Started by J.A.F._Doorhof, August 30, 2003, 08:45:18

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

J.A.F._Doorhof

http://www.immersiveforum.com/attachment.php?s=&postid=32638

Preset modes added to Resolutions menu
852x480
800x600
1024x768
1280x768
1280x1024
1365x1024
1366x768
1400x1050
1440x720


HDTV modes added
UNTESTED. I was unable to test here -- My Rogers Cable HDTV box was not functioning properly at this time. So you'll have to do the testing for me. Simply turn off autoformat and change "Format" to 480p/540p/720p/1080i


PowerStrip mirroring works again now!
You may need to calibrate a few settings in the "Advanced Menu" -> "HD-Aux" .... to get the image centered.


Refresh Rate Adjustment
In "Resolutions" -> "Advanced" you can select between 50/59.94/60 for any mode. Otherwise, leave it at "Default" setting. The correct refresh rate will be used automatically (ie 50Hz for 576p and 59.94Hz for 480p) if you leave it at "Default" setting.


Proc Amp Brightness/Contrast/Saturation Added
These are now called "Aux Brightness"/"Aux Contrast"/"Aux Saturation" and can be accessed in the "Picture" menu. These are memorized on a per-Input/Format basis.


Basic Aspect Ratio Control
ALPHA FEATURE. Very basic aspect ratio control has been added, mainly for 4:3 display users. Now you can watch anamorphic DVD's on 4:3 displays! However, please note, that for 16:9 widescreen display users, there are issues with letterbox upconversion.


More Configurable Passthrough
Now the H3DII can be used as a video switcher. Also, for users with just one display, use Automatic Passthrough, to share your computer output and your HDAux output, on the same display. Also please note, digital passthrough may not be fully working since this is driver related, use analog VGA/RGB/Component for now. To configure, go to "Resolutions" -> "Advanced"
Passthrough Off = When you have separate displays for your Radeon/Geforce and your HDAux
Passthrough Auto = When you want to share your Radeon/Geforce and your HD-Aux on same display
Passthrough Manual = When you have a dedicated display for PC and want to use HDAux as a video switcher


Better Settings Defaults
Noise Filter now OFF (to eliminate green afterimages)
VCR Sync now OFF on H3D1 systems (to eliminate jitter)
HSync Offset now at -63 for SDI input (to center the image).
VSync Offset now at 3 for SDI input (to center the image).


Switching from High-resolution mode to 480p no longer scrambles desktop
Some people had video that was still scrambled after switching to 480p. This has been fixed. Note, you will still occasionally have scrambled video on Windows desktop when viewing a higher resolution mode; high resolution modes are not supported on the Windows desktop.

ALLEEN VOOR HD-AUX bezitters !!!

MvrGr.
Frank

www.hometheater.nl   /   ISF & HAA certified
Custom installer

Volledige ISF calibraties inclusief HDR en 4K.

"Omdat je je iets niet kan voorstellen betekent dat niet dat het niet kan gebeuren"

J.A.F._Doorhof

Let op !!!
Geen videoproc meer nodig.

MvrGr.
Frank
www.hometheater.nl   /   ISF & HAA certified
Custom installer

Volledige ISF calibraties inclusief HDR en 4K.

"Omdat je je iets niet kan voorstellen betekent dat niet dat het niet kan gebeuren"

Quick Reply

Warning: this topic has not been posted in for at least 60 days.
Unless you're sure you want to reply, please consider starting a new topic.

Name:
Email:
Verification:
Please leave this box empty:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Onze vlag is blauw, wit en:
Wat is de hoofdstad van Nederland:
Shortcuts: ALT+S post or ALT+P preview