Nieuwe Holo software.

[J.A.F._Doorhof]

Versie P is zo juist gereleased.
http://www.immersiveinc.com/holofiles/HOLO3D_v16p_Update.zip

Veranderingen (vanaf versie j).

(Mar 7) Version 1.6p Changes:
All LUT adjustments can now be adjusted in finer 0.2 increments, instead of old 1.0 increments
(White Level, Black Level, Brightness, Contrast, Gamma, Red Gamma, Red/Blue White Level, Red/Blue Black Level, Red/Blue Gamma)

Redesigned, improved color-coded graphs for LUT settings. Red Chroma and Blue Chroma now have separate color-coded graphs
(green for Y, blue for Pb, and red for Pr)

RGB option for Rev7 boards
(Configure Setup Menu -> Setup Input -> Main Config)

Renaming for Input Select Menu for Power Users
(Edit the HOLO3D.INI file, within the [Inputs] section)

Windowed Mode Enhancements in right-click menu: Titlebar Enable/Disable, Always On Top Mode

Doubleclick wheel button (middle button) as alternate method of toggling between windowed/fullscreen.
(You can still use Alt+Enter or right-click)

New About/Credits Menu via Setup Menu


(Feb 19) Version 1.6n Changes:
Made modifications to new Chroma adjustments, so that it no longer interferes with the "VCR Sync" setting. This makes the picture behave more reliably like Version 1.6k instead of Version 1.6m (which a few people reported issues with).

Improved mouse response speed. Menus now respond faster to the mouse.

Adjusting the LUT settings is now less likely to "lag" during heavy adjusting, especially on slower systems.

(Feb 11) Version 1.6m Changes:
Added Chroma picture adjustments. This will help you if you have a slight greenish tint to your image. (Setup Menu -> Setup Picture)

Service Mode added. Upon enabling this setting, lots of extra settings are enabled in the Setup Menu. This includes large numbers of new Chroma adjustments for the hardcore power tweaker. (Setup Menu -> Setup OSD -> Service Mode)

Setup Menu reorganized. Some Setup Input settings have been moved to Setup Picture settings, and vice-versa. Some rarely-used settings are now hidden in a Service Menu mode.

Obsolete 'VIA Bugfix' setting has been removed.


(Jan 26) Version 1.6k Changes:
Added "Chroma Swap" and "Chroma Odd" settings to Setup Menu-> Setup Input. (Also forcefully initializes these settings upon startup)
Note: If you are getting green screens or a photo-negative image, this will likely help you.


(Dec 19) Version 1.6j Changes:
Simplified Input Switch Menu. Everytime you press MENU button (or spacebar on keyboard), the Input Select menu will now be opened by default. Also, the menu is also less cluttered by default too.
Note: Also solves the 3-spacebar-press issue reported by G_ROM
Note2: To make previously selected menu reappear instead, use ENTER key or OK button.

Input Menu is now reconfigurable via the Setup Menu to enable/disable rarely used inputs. By default, Composite-R, Composite-G and Composite-B are now removed from this menu to reduce clutter. To change how you want the Input menu to look, go to Setup Menu -> Setup Input -> Main Inputs. (This is very similiar to configuring the daughterboard)

Daugherboard users now have the option to display all possible daugherboard input combinations, useful for people who use a switcher to allow dual-purpose use of SDI and Composite on the same input. To do so, go to Setup Meni -> Setup Input -> Daughterboard and then select "List All Possible Inputs".

Further tweaks made to LUT. Apparently, my LUT tweaks in 1.6h benefited some users (less stuttering during bright scenes) but some users occasionally experienced 'green noise horizontal lines' every few minutes. This tweak should now eliminate these without degrading the benefits.

DirectX initialization retry extended to 30 seconds.
For users experiencing DirectX initialization issues if HOLO3D used in StartUp

MvrGr.
Frank