Crystalio II firmware v2.00 beschikbaar

Started by Robbo, December 21, 2006, 07:54:17

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Robbo

A new Crystalio II VPS3300 and VPS3800 firmware release 1.30 2.00 is now on the website for download and update.

New Features:

1. Picture In Picture / Picture By Picture (* see notes below)
2. Macro commands for PIP/PBP
3. Import/Export settings of PIP/PBP
4. Customizable 1080PsF
5. Macro command for setting 1080PsF output
6. Enhanced HDMI audio handling

* Notes on PIP/PBP

- When in Picture in Picture (PIP) mode, there is a small sub-picture on top of the main picture, which comes from another video source. User can adjust the position, size, overscan, transparency, and crop of the sub-picture.
- When "crop" or "overscan" is independent, the "crop"/"overscan" value set in Image menu is ignored; when "crop" or "overscan" is additional, value set in Image menu and here are combined
- When in Picture by Picture (PBP) mode, main picture is shifted to the left side of screen and a sub-picture, which comes from another video source, appears in the right side (they are side by side) of screen. User can adjust the position of the line splitting the main and sub-picture, position, overscan, transparency, and crop of the sub-picture
- Main picture and sub-picture can not come from. HDMI1 and HDMI2, or. HDMI3 and HDMI4, or. SDI1 and SDI2, or. Component1 and Component2, or. Any two of Component3, Component4, S-Video 1/2, Video 1/2/3/4
- Sub-picture retains the same image aspect ratio defined as when it is primary video source. Except that it appears as 4:3 in PIP/PBP sub-picture if it is defined as "Natural NLS" when it is primary video source.
- Crystalio applies normal deinterlacing method in Main picture (VXP or DCDi as defined in the main video source), but only use simple BOB deinterlacing in sub-picture. However, one exception case is that if main picture is defined as VXP deinterlace while sub-picture is defined as DCDi, Crystalio will apply DCDi to the sub-picture
- If main picture and sub-picture come from the same source, and it is defined as DCDi deinterlace, Crystalio will use VXP deinterlace in main picture and DCDi in sub-picture
- When in PIP or PBP mode, secondary passthru has no effect


* Bug Fixed

- HDCP problem when cadence lock mode changes
- Video level problem of VXP converting from 0-255 RGB to YCbCr
- Vertical color banding problem when boot up with internal media player as initial input port (3800 only)
- HDMI input flash problem when setting audio path
- RGBS problem of Component 3/4 input
- Resolution name may changed when replacing a modified resolution
- Occasional color error when using DCDi
- HDMI input port switching problem

Pixel Magic Support.

jaco

Hmm, liever meer support in de media player en meer stabiliteit gehad dan PiP.
Maar PiP ziet er op een Gennum potentieel geweldig uit, ik heb ooit een demo op de IBC gehad en dat was verbazingwekkend mooi en had veel mogelijkheden.

Robbo

Je moet alleen wel even 'strategisch' je inputs zetten voor PiP. Bijv. HDMI1 en HDMI2 gaan niet samen.  HDMI1 en HDMI3 wel.

jaco

Upgrade gaat wel snel van 1.30a naar 2.00

Zag hem nu switchen in dynamicvp naar 47,95 toe halverwegen een 1080i60 video demo, maar blijft vertikken om bij een 1080p24 input naar 47,95 te gaan.

Weer zo'n vraag die men bij PMS niet beantwoordt:  Waarom is er geen 1080p24 of @24 setting in DynamicVP ? Of hoe stel je het in.

Frank kun jij dit vragen ? De post hierover is: http://www.pixelmagicforum.com/forum/showthread.php?t=1939 en ze geven mij gewoon weer eens geen antwoord. Dat bedoel ik nu met slechte support.

J.A.F._Doorhof

Heb het aan hem doorgespeeld, dus ik denk dat ze er wel op reageren.
www.hometheater.nl   /   ISF & HAA certified
Custom installer

Volledige ISF calibraties inclusief HDR en 4K.

"Omdat je je iets niet kan voorstellen betekent dat niet dat het niet kan gebeuren"

jaco

#5
Ik lijkt nu eindelijk geen audio dropouts meer te hebben. Ik dacht eerst van wel, maar dat heb ik alleen geprobeerd direct na de upgrade zonder een extra re-boot.
Na net weer vers opgestart te zijn zit ik tot mijn verbazing al meer dan 1 uur te kijken en luisteren en nog geen 1 audio dropout kunnen ontdekken.

Edit: te vroeg gesproken, het begint weer weg te vallen. Unit begint weer warm te worden lijkt het, en het gaat gelijk weer mis.

Quick Reply

Warning: this topic has not been posted in for at least 60 days.
Unless you're sure you want to reply, please consider starting a new topic.

Name:
Email:
Verification:
Please leave this box empty:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Onze vlag is blauw, wit en:
Wat is de hoofdstad van Nederland:
Shortcuts: ALT+S post or ALT+P preview