Nieuwe firmware voor CII

[J.A.F._Doorhof]

A new Crystalio II VPS3300 and VPS3800 firmware release 1.23 is now available.

Upgrade file for standard version
http://www.pixelmagicsystems.com/sup...mware/v123.zip

Upgrade file for PD version
http://www.pixelmagicsystems.com/sup...are/v123pd.zip


RELEASE NOTES
---------------
Macro Definitions (see below)
Import/Export of profiles and settings (see below)
New front panel LCD command "System"->"Control OSD", to invoke OSD by front panel LCD
New front panel LCD command "Input"->"Port Config"->"HDMI"->"Cable Eq.", to match HDMI cable length
Show user defined port names in quick selection menu
Minor bug fixes on secondary pass-through
Remote Control Repeat Delay, set to 26 to disable repeat key
Warning: Input profile may lost after firmware upgrade, please write down the important settings if needed.


Macro
------

Overview:
Macro feature lets user to redefine the functions of the C2 remote key. By default, each key in the C2 remote has a specific function which is pre-defined, user can use the Macro feature to override the functions of each of the key.

Using Macro:

Advanced Option must be turned on first.
Go to System --> Macro to display the Macro Definition page of the OSD.
In the Macro Definition page, all the keys that can be redefined is shown according to its location on the remote control. In order to redefine the function of a key:
Select the key in the Macro Definition page and press OK.
Then, the Macro Definition edit page is shown for that key.
In the Macro Definition edit page, user can assign the name of the macro in the "Macro Name" field.
The function of the Key can be specified by a list of ordered commands (max. 10). Commands can be selected by firstly select a "Groups", and then select a "Subgroups", and finally, select a command from the "Command" combo box.
Note: since there are so many commands (over 180) in C2 that can be selected in Macro Definition, commands are grouped into groups and sub-groups for easy selection
If a macro is defined for a key, as the key is pressed, the specified commands will be executed one by one.
Notes: execution of commands will be stopped if an OSD setup command is executed in the macro.
Virtual Key:
In the Macro Definition page, there is a button labeled "Virtual Keys" at the lower right corner. As this button is selected, 20 virtual keys are shown in the "Macro Virtual Key Definition" page.
User can select the virtual keys and define its function as normal remote keys.
Virtual Keys are remote key that are not in the C2 remote, but can be programmed into other remote controls. The remote key codes are as follow:
VK00 - 0xb94627d8
VK01 - 0xb84727d8
VK02 - 0xb74827d8
VK03 - 0xb64927d8
VK04 - 0xb54a27d8
VK05 - 0xb44b27d8
VK06 - 0xb34c27d8
VK07 - 0xb24d27d8
VK08 - 0xb14e27d8
VK09 - 0xb04f27d8

VK10 - 0xda2527d8
VK11 - 0xd92627d8
VK12 - 0xd82727d8
VK13 - 0xd72827d8
VK14 - 0xd62927d8
VK15 - 0xd52a27d8
VK16 - 0xd42b27d8
VK17 - 0xd32c27d8
VK18 - 0xd22d27d8
VK19 - 0xd12e27d8

MediaPlayer (VPS3800 only):
If input source is MediaPlayer, Macro Definition edit page is different. User can specify the selected C2 remote key to act as a MediaBox remote key.

Import / Export
---------------

There are two ways of Import/Export settings:

1. System --> Import/Export Settings
As "Import/Export Settings" is selected, the "Import/Export Settings" page is shown on OSD.
User can select which types of settings (can be multiple selections) will be imported or exported.
Then select the "Export" button to export the selected settings. Or, select the "Import" button to import the selected settings.

Note: When Import or Export the settings, an USB thumb drive must be plugged in the USB port at the end of C2 first.

This way of Import/Export will import or export all the data (current settings and all profiles) of the selected type.
2. Profile --> Advanced Import/Export
If Advanced option is turned on, there will be two more buttons labeled "Advaned Import" and "Advanced Export" at the lower right corner of each of the Porfile OSD page (Input Profile, Output Profile, Video Profile and Secondary Passthru Profile).
By this feature, user can import or export individual profiles.

Advanced Export:
In the "Advanced Export" OSD page, user can select which profiles will be exported by checking the check list, and then press the "Export" button to export the selected profile.

Advanced Import:
The USB thumb drive that containes the exported profiles must be plugged into the USB port first before "Advanced Import" page can be shown.
In the "Advanced Import" OSD page, the profiles which is in the USB thumb drive will be listed. User can then select which profile is imported into which profile slot in the system. Then, press the "Import" button to import the profile.