Het grote Lyngdorf topic

Started by garmtz, February 18, 2006, 09:51:38

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

hifiman

Zojuist antwoord gekregen:

The safe way to do this is to construct a 'Y' adaptor with a 390 Ohm series
resistor in the left and right '+' (signal) paths.
This way the line output driver of the SDAI 2175 should be protected
sufficiently.

Med venlig hilsen/Best Regards,


Dat wordt dus vanavond even een self-made Y-adaptertje maken met 390R weerstandjes  ;D
Wel super dat je op een dergelijke vraag zo'n concreet antwoord krijgt en niet gewoon "een dergelijke configuratie supporten wij niet" of iets dergelijks :P

Deleted member

Surroundoplossingen van Lyngdorf zijn onderweg!  :D

QuoteLyngdorf Audio ApS Acquires Kuusama Design Oy

Lyngdorf Audio ApS in Skive, Denmark, has acquired Kuusama Design Oy,
based in Tampere, Finland, in order to expand its operations and
product development to encompass multi-channel audio decoding for home
theatres.

Lyngdorf Audio ApS was founded in 2005 and has grown rapidly from
employing a handful of people to nearly 50 employees, of which half
are working in R&D developing new innovative sound system solutions.
Lyngdorf Audio is the world leader in the areas of full digital
amplification, advanced digital signal processing for room correction
and specialized speaker systems. The ground-breaking room correction
system RoomPerfect™ has already distinguished itself as being the most
innovative room correction system in the market. Lyngdorf Audio
technology can be found not only in Lyngdorf audio stereo music
systems, but will also be available in 2007 as OEM solutions for new
customers in extreme high-end music systems and professional audio
products.

Kuusama Design Oy was founded by Juha Kuusama in 2003 as a specialized
OEM design house for home theatre products. The current design group
will now join forces with the parent company to create new Lyngdorf
Audio multi-channel products. Juha Kuusama will continue as the CEO
and chief designer of Lyngdorf Audio Oy. The combined R&D resources of
the two newly-joined companies will make it the largest high fidelity
design group in Europe.

Kuusama Design Oy will change its name to Lyngdorf Audio Oy and will
expand its operations in Tampere by combining its multi-channel
decoder technology with the unique RoomPerfect™ room correction system
and full digital amplification technology from Lyngdorf Audio ApS.
Combining the technologies from both companies will create unique
products for home theatres that simply do not exist today - the
intelligence and performance of RoomPerfect™ and the astonishing
capabilities of Lyngdorf's new generation speaker systems will
redefine the state of the art in the sector.

It is the strategy of Lyngdorf Audio ApS to prove new technologies in
Lyngdorf products before offering these to OEM customers. Lyngdorf
Audio Oy will continue this strategy and will offer significant,
advanced home theatre technologies to other high-end manufacturers by
2008, a practice that is expected to deliver significant benefits to
customers.

Further Information:

Lyngdorf Audio ApS Lyngdorf Audio Oy
Jes Mosgaard Juha Kuusama
Vaeselvej 114 Hermiankatu 6 A
DK-7800 Skive 33720 Tampere
Denmark Finland

Telephone: +45 4691 1090 Telephone: +358 40 705 8815
Direct: +45 4691 2092
Fax: +45 9648 7500 Fax: +358 3 316 7401
Mobile: +45 2085 3588

Aurora13

Quote from: Antoine on March 17, 2007, 11:10:45
Surroundoplossingen van Lyngdorf zijn onderweg!  :D


Tegen de tijd dat ik ga upgraden is het er hopelijk en kan ik weer een keuze :D
<a href="http://www.htforum.nl/yabbse/index.php?topic=51505">HTPC Zalman HD501: HDMI -> Pioneer Plasma LX-608D
S/PDIF 1 -> Tact S2150 -> KEF LS50 fronts
S/PDIF 2 -> Tact S2150 -> KEF LS50 center + Velodyne EQ-Max 8
S/PDIF 3 -> Tact S2150 ->

Deleted member

Filmpje!  :D

http://www.cinenow.com/uk/play-video-699.html

QuoteBristol 2007 : Lyngdorf amplifiers, subwoofer and RoomPerfect

Robert Sindren is the exclusive importer in the UK for Lyngdorf, with a reputation built on expertise in digital amplification. Rob shows us the brand's unique subwoofer and explains the specs and technologies that make this one rather exceptional. One of the other highlights on demo was Lyngdorf's RoomPerfect™, a true revolution to create an undistorted listening experience in your room. Keep in mind, Millennium was the world's first fully digital amplifier launched in 1998, now in the MK IV version, and they have also introduced more affordable Hi-Fi models down to under 3000£, And Lyngdorf will be making products for Home Cinema soon, so keep in tune !

Deleted member

Sinds 19/3 is er ook weer een nieuwe firmware voor de TDAi2200(+)!  :)

Quote
release 3.4 2007 03/19:
- Improved mute function for setting/selecting filters and delay.
- Improved display start-up from power off mode.
- Improved communication with RoomPerfect™ module.
- Bugfixes

http://www.lyngdorf.com/ContentId/397/Default.aspx#TDA2200

Deleted member

YES!!  O0

Quote
I'm responsible for the software for the TDA(I) 2200 and I just want to
inform you that at the moment I'm working on direct selection of inputs.

It will be something like pressing "Digital" or "Analog" plus a numeric key.

It will be released within the next month or two.

Kind regards

Claus Kjeldsen
Software designer
Lyngdorf Audio

PM

Gaaf!! Daar zit ik ook op te wachten... heel mooi! Fijn dat ze na oplevering van het product ook nog goede support leveren en verbeteringen doorvoeren.
Groeten, Peter

Deleted member

Eindelijk direct de input selecteren met m'n Logitech Harmony!  ;)

En wat betreft de support die is idd. fantastisch. Je ziet ze langzaam aan het wensenlijstje zoals dat in de Lyngdorf UG staat afwerken!  O0

Deleted member

De Lyngdorf DPA-1 is released!

QuoteThe DPA-1 is a true digital pre-amplifier with full RoomPerfect™ functionality incorporated.

http://www.lyngdorf.com/ContentId/494/Default.aspx


)p(


molle

Dus deze zou ik dan gewoon aan mijn SDAI 2175 kunnen hangen en ik ben vertrokken.
Wat is eigenlijk de kostprijs hiervan?
STEREO: Mcintosh C2300 - VDH Array M-1 Monoblokken - Tannoy Prestige Stirling GR - Auralic Altair G1 - Thorens TD 126MKIII + Nagaoka MP500 - Cisco Meraki Switch(Yeti) - NUC Roon Rock - Sennheiser HD 650 - Essential Audio Tools Multiplier 7 + Powercords - Audioquest - Grimm Audio SQM XLR - Duelund Dual DCA12GA - Yeti Acoustics Meraki Switch -  Yeti Acoustics netfilter


Deleted member

Quote from: molle on March 30, 2007, 21:49:49
Dus deze zou ik dan gewoon aan mijn SDAI 2175 kunnen hangen en ik ben vertrokken.
Wat is eigenlijk de kostprijs hiervan?

Garmt schreef elders:

QuoteIk heb de volgende prijzen doorgekregen (VOORLOPIG!):

    DPA-1   EURO 4.100,-
    RP-1    EURO 3.100,-

Edit: linkje naar het topic waar de DPA-1 en RP-1 worden beschreven: http://www.htforum.nl/yabbse/index.php?topic=54211.0

molle

STEREO: Mcintosh C2300 - VDH Array M-1 Monoblokken - Tannoy Prestige Stirling GR - Auralic Altair G1 - Thorens TD 126MKIII + Nagaoka MP500 - Cisco Meraki Switch(Yeti) - NUC Roon Rock - Sennheiser HD 650 - Essential Audio Tools Multiplier 7 + Powercords - Audioquest - Grimm Audio SQM XLR - Duelund Dual DCA12GA - Yeti Acoustics Meraki Switch -  Yeti Acoustics netfilter

Deleted member

Quote from: molle on March 30, 2007, 21:57:20
Thx. Dus welke zou ik dan moeten nemen?

De RP-1 is voor tussen een willekeurige voor- en eindversterker. De DPA-1 is puur een digitale voorversterker (met ook A/D). Je zou dus je SDAi2175 kunnen inruilen voor een SDA2175 eindversterker met de DPA-1.  :)

molle

Quote from: Antoine on March 30, 2007, 22:05:12
De RP-1 is voor tussen een willekeurige voor- en eindversterker. De DPA-1 is puur een digitale voorversterker. Je zou dus je SDAi2175 kunnen inruilen voor een SDA2175 eindversterker met de DPA-1.  :)

Ok. Begrepen ;)
STEREO: Mcintosh C2300 - VDH Array M-1 Monoblokken - Tannoy Prestige Stirling GR - Auralic Altair G1 - Thorens TD 126MKIII + Nagaoka MP500 - Cisco Meraki Switch(Yeti) - NUC Roon Rock - Sennheiser HD 650 - Essential Audio Tools Multiplier 7 + Powercords - Audioquest - Grimm Audio SQM XLR - Duelund Dual DCA12GA - Yeti Acoustics Meraki Switch -  Yeti Acoustics netfilter

PM

Groeten, Peter

Deleted member

Nope, al scheelt het niet zo heel veel.

TDA: 3490
Roomperfect Module: 1790
A/D converter: 390 (standaard in DPA-1)
---------------------------+
Totaal: 5670

DPA-1: 4100
SDA2175: 1190
---------------------------+
Totaal: 5290


Edit: scheelt dus 380 euro, dus als je voor optie 2 gaat krijg je de A/D converter "voor niks". Al verdampt dit wellicht weer omdat je een extra paar interlinks nodig hebt. ;)

Maar let wel, dit is berekend met de voorlopige prijzen van de DPA-1, Bjorn of Garmt zouden nu over de definitieve prijzen moeten beschikken.

bmateijsen

Officiele prijzen voor de nieuwe produkten:

DPA-1 Lyngdorf voorversterker: 4500 Euro (vanaf heden te bestellen)
RP-1 standalone roomperfect: 3500 Euro (nog niet leverbaar).

Groet,

Bjorn

Deleted member

Dan wordt de DPA-1 met SDA2175 dus bijna exact zo duur als een TDAi2200+ met RoomPerfect module. Slim van Lyngdorf!  ;)

garmtz

IK verwacht echter van een TDAi 2200 betere resultaten, omdat er een D/A - A/D stap wordt overgeslagen. Bovendien zitten er in een TDA iets mooiere componenten (eindtrap).

Shorty

Quote from: garmtz on April  3, 2007, 07:05:13
IK verwacht echter van een TDAi 2200 betere resultaten, omdat er een D/A - A/D stap wordt overgeslagen.

Zitten er dan geen digitale ingangen op de DPA-1?  :o  :P :(

En wat voor uitgangen zitten er eigenlijk op? Staat niks over op de site van Lyngdorf... ::)

VrGr,

Bart J.

Deleted member

Quote from: Shorty on April  8, 2007, 18:33:35
Zitten er dan geen digitale ingangen op de DPA-1?  :o  :P :(

Jawel maar de SDA2175 (SDA=semi digital amplifier) heeft alleen analoge ingangen waardoor zoals Garmt al zei er een extra D/A - A/D stap is wanneer je de DPA-1 aan een SDA2175 hangt.

Quote from: Shorty on April  8, 2007, 18:33:35
En wat voor uitgangen zitten er eigenlijk op? Staat niks over op de site van Lyngdorf... ::)

VrGr,

Bart J.

De specs zijn idd. nog niet volledig maar het persbericht vertelt dat er D/D, D/A en A/A mogelijk is dus de DPA-1 heeft zowel digitale als analoge uitgangen, waarschijnlijk zowel balanced als unbalanced net als de TDA.

Shorty

QuoteJawel maar de SDA2175 (SDA=semi digital amplifier) heeft alleen analoge ingangen waardoor zoals Garmt al zei er een extra D/A - A/D stap is wanneer je de DPA-1 aan een SDA2175 hangt.

Aaahhh zo... ik dacht Garmtzs opmerking op de voorversterking sloeg....  :P

Zit er eigenlijk een HT pass-through op de DPA-1, vraag ik me nu af (ja, ik krijg jeuk... ;D ).

VrGr,

Bart J.

bmateijsen

Ik denk van niet, maar de volume regeling is digitaal, en dus makkelijk afleesbaar voor HT gebruik. (dat is dan bijna hetzelfde als pass-through).

Quote from: Shorty on April 10, 2007, 14:01:26

Zit er eigenlijk een HT pass-through op de DPA-1, vraag ik me nu af (ja, ik krijg jeuk... ;D ).

VrGr,

Bart J.