Het grote Lyngdorf topic

Started by garmtz, February 18, 2006, 09:51:38

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

garmtz

Quote from: stuiv on December  9, 2006, 18:44:29
Hoi jongens.

Ik heb vandaag ook de nieuwe software in de TDA geladen (fluitje van een cent) het ziet er
veel belovend uit, maar ik heb het idee dat het E50 probleem niet is opgelost kan iemand
dat bevestigen.

Het is ook niet zo'n groot probleem maar toch.

Op het Yahoo forum heeft iemand ongeveer het zelfde probleem (E50) als ik heb,
ik wacht het wel even af hoe dat gaat aflopen.


MVG Ruud.

Oftwel, je hebt het E50 probleem nog?


hifiman

Ik vind het wel jammer dat ik de SDAi2175 nooit gereviewed zie worden in de bekende bladen..  :'(

garmtz

Toch heeft Hifi World twee hele mooie reviews geschreven over de SDAi 2175. Met veel extra technische info!

Kijk op de Lyngdorf site!

hifiman

Quote from: garmtz on December 29, 2006, 09:55:34
Toch heeft Hifi World twee hele mooie reviews geschreven over de SDAi 2175. Met veel extra technische info!

Kijk op de Lyngdorf site!
Sorry ik was wat onduidelijk, ik bedoelde dus recentere reviews dan de door jou genoemde en ook in bladen die hier in de kiosks voorkomen. Het valt mij op dat als er een artikel over Lyngdorf producten verschijnt het altijd over roomperfect gaat. Begrijpelijk, maar ik zou het leuk vinden wat meer reviews van de 2175 te zien  ;D

Durk

HT-set : Integra- Chord- Sonus Faber - Nordost
http://www.htforum.nl/yabbse/index.php?topic=68749

molle

Quote from: Durk on December 29, 2006, 10:18:48
heeft lyngdorf ook een tuner in het programma?

Nope. Voorlopig toch nog niet. Heb er vorige week een mail naar gestuurd omdat ik ook wel interesse had in een bijbehorende tuner.
STEREO: Mcintosh C2300 - VDH Array M-1 Monoblokken - Tannoy Prestige Stirling GR - Auralic Altair G1 - Thorens TD 126MKIII + Nagaoka MP500 - Cisco Meraki Switch(Yeti) - NUC Roon Rock - Sennheiser HD 650 - Essential Audio Tools Multiplier 7 + Powercords - Audioquest - Grimm Audio SQM XLR - Duelund Dual DCA12GA - Yeti Acoustics Meraki Switch -  Yeti Acoustics netfilter

Durk

uhm.. jammer dan valt lyndorf voorlopig af voor mijn schoonvader.. hij is sinds het overlijden van cd speler en tuner op zoek naar een vervangend setje: maar de componenten moet wel bij elkaar passen..



HT-set : Integra- Chord- Sonus Faber - Nordost
http://www.htforum.nl/yabbse/index.php?topic=68749

Deleted member

M'n 2000e post op dit forum is er een met een primeur! ;D Ik heb me voorgedaan als een analyst en wat nog niet publieke persberichten gedownload!  :D

Nieuwe Lyngdorf produkten! Worden deze week gepresenteerd op de CES!  :)

Vanaf maart 2007:
DPA-1, a digital pre-amplifier that will control and drive any power amplifier.

The DPA-1 is a true digital pre-amplifier with full RoomPerfect™ functionality incorporated. That means that, in addition to global correction which improves the sound in the entire room, users can also pick from up to 8 presets that optimize the sound at 8 different preferred listening positions in the room.
In the digital domain the company has added sophisticated filtering and ensured true galvanic separation of each single input. In that way the ground planes for the digital and analog domains are completely separated and sound-deteriorating ground loops are eliminated.
Though it is a true digital product users can still connect analog sources as the DPA-1 comes, as standard, with a state-of-the-art built-in A/D converter.

Whether you use the single-ended or balanced inputs provided, the signal is immediately converted to a balanced signal. Input selection, meanwhile, is carried out via high-end, double gold-plated relays, normally only encountered in expensive high-precision measuring equipment.
All the signal paths of the DPA-1 are individually impedance-compensated (using transmission-line principles) ensuring better noise immunity, while optimum impedance matching is maintained in order to preserve the original signal shape.

In truth, the DPA-1 is much more than just a pre-amplifier – it is a complete digital signal processing control center that allows users to configure it as an active crossover for 2.0, 2.1 and 2+2 loudspeaker solutions.

Remarkably, the menus necessary to do this are all directly accessible on the product itself – settings for level, delay, routing, crossover topology, slope and frequency are all easily user-adjustable without the aid of a PC.

The outputs in the analog domain are single-ended and fully balanced while signals in the digital domain are available via S/PDIF outputs.

RP-1 'Black Box', a standalone room processor that can be inserted in any conventional pre-/power amplifier set up, or via a tape loop on an integrated amplifier.

We call it our little 'Black Box' but there's nothing mysterious about what the RP-1 does. This is the simplest way of removing room-generated anomalies and the fastest way to improve the sonic performance of your existing audio system.

You connect it between your pre- and power amplifier, set the input sensitivity and make the RoomPerfect™ calibration... easily done in less than ½ hour! That's it!
And bear in mind that we are not just talking 'tweaking' here. This device removes the single, most influential potential obstacle in the quest to achieve the best possible sound... the room itself.
In essence, the 'Black Box' will improve sound reproduction in any audio system, from basic to very high-end set-ups.

Since RP-1 features analog interfaces and RoomPerfect™ works entirely in the digital domain we have taken some quite dramatic steps in order to maintain signal quality at an extremely high level.
All analog-to-digital signal conversion is handled via the same converter that we employ in the flagship Millennium ADC. When it comes to D/A conversion, at the output stage we have used the converter from top of the range Millennium Mk IV amplifier. Truly high-end thinking!

As with the DPA-1 we decided that the advanced user should still have the option of creating 2.0, 2.1 and 2+2 loudspeaker solutions. So the RP-1 is much more than a room processor – it is a complete digital signal processing control center that allows you to create speaker configurations ranging from simple bi-amped arrangements to advanced active speaker systems and/or 2+2 systems i.e. incorporating Lyngdorf Audio boundary woofers.

However, we have kept operation simple by making all the menus necessary for configuring these advanced set-ups directly accessible on the product. So, once again, there's no need for a PC in order to adjust level, delay, routing, crossover topology, slope and frequency.
And, to ensure maximum compatibility, the inputs/outputs can be switched between single ended or balanced.

Vanaf mei 2007:
DP-1 Dipole Loudspeaker: The DP-1 is the first dipole speaker to emerge from Lyngdorf Audio. This product features a compact front baffle in a stunning piano-lacquered finish... but posesses no cabinet! The slightly curved baffle is securely mounted in a cast-iron base, making the entire design appear very minimalist, not obstructing interior decoration.

Not having a cabinet means that the DP-1 is free from the usual array of cabinet colorations which – no matter what size of cabinet is used – any normal speaker will forever be battling. Furthermore this open construction eliminates any trace of the mechanical distortion that's found in traditional speakers. There is absolutely no air compression affecting the movement of the cone. The result is a very transparent, unsurprisingly unboxy sound quality which adds nothing in the way of distortion to your recordings.
That's because the very nature of a dipole speaker means that it plays in concert with a room, not against it.

Equipped with the highly acclaimed 'Revelator' dome tweeter from Scan-Speak this speaker ensures the highest degree of precision in the high frequency range. Air-cooling instead of conventional ferrofluid eliminates any mechanical distortion from the tweeter.

The 6½" woofer features an extremely stiff magnesium cone that has no break up in the frequency range where it is used. This absence of stored energy means that it has an unsurpassed transient response. The metal center plug ensures better heat dissipation when the party gets going.

BW-1 Boundary Woofer: Tailored to match the DP-1, the BW-1 handles low frequencies in this system. So it's a subwoofer then? No, not at all! An explanation is in order. This 'Boundary Woofer' puts the floor and wall to use, generating unsurpassed impulse response all the way up to 500 Hz. The compact design featuring a massive, frontfiring 10" woofer has a sensitivity of 92 dB. The extremely large magnet also ensures a low q factor even in the very compact cabinet of 12 liters. This, together with the placement – low and against the wall - ensures 100% coherence between direct sound from the BW-1 and reflections from the floor and wall.

Derived from the highly acclaimed Lyngdorf Audio W210 corner woofer the BW-1 allows for a more flexible solution as it does not have to be placed in a corner. This is particularly useful for applications in an L-shaped room or where furniture and doors make corner placement impossible.

The BW-1 still relies on the same principle of operation, however. But placing it so that two of the three boundaries – dimensions if you will – are brought into play will ensure a standard of bass reproduction which cannot be obtained by a normal two-channel speaker system.

Edit: Fotootje in mekaar gedraaid:


Rody



Rody

Ik denk dat vooral de RP-1 'Black Box' heel populair kan worden (mits betaalbaar).

Deleted member

Quote from: Rody on January  9, 2007, 01:33:45
Ik denk dat vooral de RP-1 'Black Box' heel populair kan worden (mits betaalbaar).

Dat denk ik ook inderdaad, er werd ook veelvuldig naar gevraagd op het Lyngdorf forum. Na de laatste firmwareupgrade van RP ben ik echt super tevreden met RoomPerfect. Ik kan absoluut nooit meer zonder! (of een andere goede vorm van kamercorrectie)

Voor mij met deze nieuwe producten in elk geval nog geen redenen om te upgraden, daar ben ik blij om!  ;) Wel denk ik dat wanneer er foto's verschijnen van de BW-1 ik nog een keer ga experimenteren met de bassunits van m'n speakers (bass +mid/hoog zijn gescheiden) tegen de muur zoals ook de BW-1's geplaatst dienen te worden.  :)

PM

Quote from: Antoine on January  9, 2007, 01:15:58
M'n 2000e post op dit forum is er een met een primeur! ;D Ik heb me voorgedaan als een analyst en wat nog niet publieke persberichten gedownload!  :D
De pers was HIER al wat sneller ;)
Wel mooie producten! Ben wel benieuwd naar de speakers en nieuwe woofers
Groeten, Peter

Deleted member

Quote from: PM on January  9, 2007, 08:53:52
De pers was HIER al wat sneller ;)
Wel mooie producten! Ben wel benieuwd naar de speakers en nieuwe woofers

Oh...oeps, niet gezien!  :-[ Weer geen primeur!  ;)

Maar het ziet er inderdaad goed uit, ben ook benieuwd!

garmtz

Wij zijn tot nu toe altijd een beetje laat met het horen van nieuws over Lyngdorf... :-\

Deleted member

Hele slechte zaak eigenlijk, jullie zouden het eerder moeten weten dan wij uiteraard.  :-\

Maar goed, gelukkig is er nog een aantal freaks op het HTForum die actief op zoek gaat en het nieuws vind vóór "de grotere massa" er bekend mee raakt!  ;)  ;D

garmtz

Mijn dank is groot... ;)  Als ik voor alle merken die we voeren al het nieuws moest bijhouden, kwam ik niet meer aan werken toe... ;D

Deleted member

Quote from: garmtz on January  9, 2007, 09:39:11
Als ik voor alle merken die we voeren al het nieuws moest bijhouden, kwam ik niet meer aan werken toe... ;D

Lijkt me ook vrij onmogelijk! :) Mijn opmerking was ook zeker niet bedoeld als een sarcastische/verwijtende, daarom noemde ik ons ook "freaks"!  ;D

garmtz

Quote from: Antoine on January  9, 2007, 09:45:00
Lijkt me ook vrij onmogelijk! :) Mijn opmerking was ook zeker niet bedoeld als een sarcastische/verwijtende, daarom noemde ik ons ook "freaks"!  ;D

I know... ;)

molle

Hmm, zo een RP-1 spreekt me ook wel aan. Zou ik best wel kunnen gebruiken in mijn ruimte hier. Ben benieuwd naar de prijzen.
STEREO: Mcintosh C2300 - VDH Array M-1 Monoblokken - Tannoy Prestige Stirling GR - Auralic Altair G1 - Thorens TD 126MKIII + Nagaoka MP500 - Cisco Meraki Switch(Yeti) - NUC Roon Rock - Sennheiser HD 650 - Essential Audio Tools Multiplier 7 + Powercords - Audioquest - Grimm Audio SQM XLR - Duelund Dual DCA12GA - Yeti Acoustics Meraki Switch -  Yeti Acoustics netfilter

Staaled

Fotootje Lyngdorf dipool speakers.

"Inability to accept the mystic experience is more than an intellectual handicap. Lack of awareness of the basic unity of organism and environment is a serious and dangerous hallucination. For in a civilization equipped with immense technological power, the sense of alienation between man and nature leads to the use of technology in a hostile spirit – to the "conquest" of nature instead of intelligent co-operation with nature." (Alan Watts, Psychedelics and Religious Experience, 1968)

PM

Met een nieuwe woofer op de achtergrond, niet?

Leuk modelletje overigens..
Groeten, Peter

hifiman

Wat die RP-1 betreft, ik vind het een beetje raar dat deze in het analoge signaalpad wordt aangesloten. Dat betekent dus een extra AD en DA conversie hetgeen voorkomen zou worden als de box tussen dig-out en dig-in zou worden aangesloten...  ::)

Deleted member

Quote from: Audioloog on January 10, 2007, 11:14:20
Wat die DPA-1 betreft, ik vind het een beetje raar dat deze in het analoge signaalpad wordt aangesloten. Dat betekent dus een extra AD en DA conversie hetgeen voorkomen zou worden als de box tussen dig-out en dig-in zou worden aangesloten...  ::)

De RP-1 bedoel je denk ik. Deze lijkt mij echt bedoeld voor mensen met puur analoge versterking en/of analoge bronen die toch roomcorrection willen. De DPA-1 is 'gewoon' een TDA met RP en A/D zonder eindversterking en werkt D/D, D/A, A/A en A/D.