12 inch arm zo te zien en welk element?
Het is trouwens een wat ouder element die een retip heeft gehad, hopelijk is het een mooie match met de arm.
Mocht deze niet voldoen dan komt er wel weer wat anders, maar eerst maar eens proberen.
Features and Improvements DV-20X has a solid aluminium alloy body similar to the XX-2. The cantilever is a 6mm length of hard aluminium pipe with a Micro-Ridge stylus. The magnetic flux damping and softened magnetism along with powerful neodymium magnets gives the 20XH a healthy 2.8 mV output - suitable for most MM inputs. The 20XL has an output of 0.3 mV ideal for most MC phono stages. Both high and low versions of their 20X are available ensure for the optimum end result.
The high output model is most suited to valve preamplifiers or electronics that only offer MM inputs whilst the low output version offers superb performance when combined with dedicated moving coil inputs.
SPECIFICTIONS
Type High/Low output moving coil cartridge with flux damper and softened magnetism
Output Voltage 2.8mV / 0.3mV (at 1KHz, 5cm/sec.)
Channel Separation 25 dB (at 1KHz)
Channel balance 1.0 dB (at 1KHz)
Frequency response 20 - 20,000Hz (± 2dB)
Compliance 12 x 10-6 cm/dyn
Tracking force 1.8 - 2.2grams
DC resistance 150 ohms / 5 ohms
Recommended load resistance > 1Kohms / > 30 ohms
Cantilever 6mm length, hard aluminium pipe
Stylus Micro-Ridge
Weight 8.6 grams
