Algemeen Kodi Topic

Started by skank1, August 23, 2012, 10:26:55

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

skank1

XBMC 13 – Gotham – August Cycle
05
Sep
73 Comments » Posted By: Nathan Betzen on Sep 05, 2013 in Site News
Some of the newly available 3D Options
For those keeping track, we've just completed alpha #7 in the August cycle, which includes two absolutely massive new features: Stereoscopic 3D support and Android Hardware video decoding. As always, the monthly alpha build is available on our Snapshots page, and the typical warning applies: this is alpha software; things are very likely to break. With that said, let's look at what we've been working on.

Android Hardware Decoding
It's been a long time coming, but we are excited to announce that hardware decoding of video has finally made its way to the XBMC for Android platform. The most important caveat is that the implemented hardware decoding does not support AmLogic or Allwinner chipsets, and it does require Android 4.0 ("Ice Cream Sandwich") or higher to run. With that said, the more popular tablets sold in the past year, such as the Nexus 7 and 10, should work quite well with this alpha, and users are welcome to discuss their experiences in the comments below. Kudos to Koying for his work on this project.

Stereoscopic 3D Rendering
For you lovers of 3D out there, we are also pleased to say that we now support 3D movies encoded in the following formats: SBS, TAB, anaglyph, and interlaced (on supported platforms for passive TVs). Unfortunately, XBMC cannot yet support 3D blurays and cannot provide hardware acceleration for FullSBS/TAB movies (therefore limiting those videos to relatively high powered CPUs).

A useful feature that also comes with this alpha is a dedicated button to toggle 3D mode, which has two benefits: First, while XBMC should automatically recognize 3D-encoded movies, if it fails to recognize the format, users can force 3D mode. Second, users are now welcome to encode all their ripped blu-rays into 3D and skip making a second encode in 2D, because toggling off 3D mode on a 3D recognized movie will simply display the film in traditional 2D. This button requires an update to your skin of choice, so, if you are not using Confluence, feel free to point the feature out to your favorite Skilled Skinner.

Some of the newly available 3D Options
Some of the newly available 3D Options

Context Menu Clean-up
In addition to bigger features, if you've been following along, you know that we've been working for quite some time on making the entire user experience more friendly. To that end, this past month has been one of cleaning up the context menu. We've worked to clean it up in two ways. First, we've pulled items out that don't actually make sense to be in a context menu. Second, we've moved some options that people rarely use into a second "Manage" dialog.

In your day-to-day experience, this means the Update Library option is now always available in the side-bar, as can be seen in the below picture. This is quite similar to how we've moved the different setting levels (Basic/Standard/Advanced/Expert) to the sidebar on the System Settings pages.

UpdateLibrary



And the context menu has a new option to explore the Manage menu...

ManageOption
Manage... option



Manage... menu for TV shows
Manage... menu for TV shows

Goodbye Windows XP
We are happy to announce that we will be joining Microsoft in dropping support for Windows XP in 2014 by dropping support for XP with XBMC 13. At present, there are certain features that are being held back by our continuing support of the XP platform, and the best path forward is to halt support on the roughly 12 year old OS. Vista, 7, and 8 will all continue to be supported from this point forward.

Hasta la XP, baby.
Hasta la XP, baby.

Bug List and Other Changes
A change that certainly couldn't be called a feature involves Weather Underground. Unfortunately, WU is currently being hit with far more XBMC traffic than even a full sponsorship could pay for. To resolve this, at least in the short term, XBMC 13 will now ship without a default weather app. Users who are upgrading will not see a change, and new users are welcome to re-download the addon if they choose.

Finally, below are some notable bugs fixed with this month's update

EPG no longer crashes when there is no EPG data
Music Database fixes
font processing fixes
Fixed non-trivial dirty rectangle modes
Fix gain for MP3 files (vs FLAC and other audio files)
Fix file parse bugs (results in speedier file parsing)
Numerous Raspberry Pi fixes
Conclusion
Of course, as always, this is merely a very small sample of the many changes in this cycle. If you are feeling a bit brave and a bit lucky, it's time to start downloading. Be aware though, that this is very alpha software with potentially numerous bugs. There is a  good chance that this alpha will break on you.

Windows
OSX and OSX-x86-64
Android
Apple TV and iOS installation instructions
Ubuntu users, please point to the unstable ppa as described in the Linux instructions
How to Contribute

If you use this cycle's build, we encourage you to submit bugs in Trac, provide support in our Forums where you can, or donate to the Foundation if you like. For a current FAQ on XBMC 13, visit our Gotham FAQ.
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

RalphH

Al getest? Is nog Alpha phase toch? Ik wacht ff tot de betas. Wel al ergens gelezen dat er enige vordering lijkt te zijn op gebied van BR menu ondersteuning.
Onkyo rz70 /JBL HDI 1600, Tannoy 609, D750 en custom Tannoy Atmos speakers/ SVS PB13 Ultra & PB12+ /Earthquake Q10B / Epson LS12000 / Lumene 106" / NVIDIA Shield TV Pro
Klikkerdeklik --> HT in de tuinkamer

skank1

Ik draai hem thuis gewoon. Heb zelfs al een aangepaste skin  :D
Ik vind hem persoonlijk wel stabiel genoeg om hem op mn main machine te gebruiken.
Let wel op, ik gebruik de monthly builds, niet de alpha die elke dag verschijnt.

Ik kan wel zeggen, dat ik enorm uitkijk naar de final.
Dit wordt echt de knapste release :)
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

M:iNdO

Misschien niet helemaal on-topic maar bij mij draait Plex en (sinds kort) XBMC niet (meer) goed.

Tegenwoordig pauzeert een film om de paar seconden en moet ie steeds bufferen. Voor de duidelijkheid, het gaat hier om 1080p MKV bestanden die vanaf mijn QNAP Nas via mijn MacMini (oud model) gestreamd worden. Tevens reageren de (systeem)geluiden van Plex/XBMC niet meer direct bij het navigeren (soms hoor je bij 2x navigeren geen systeemgeluid en de 3e x weer wel enz.).

Voorheen geen probleem en draaide het allemaal lekker soepel. Wat zou het probleem kunnen zijn?

Ik kan zelf maar een paar dingen bedenken:
- NAS schijven raken te vol (+/- 17 GB vrij);
- Netwerk of NAS problemen (niet goed of niet optimaal ingesteld);
- Netwerkkabel(s) is/zijn niet meer jofel;
- mijn MacMini kan het niet meer aan of alles moet weer opnieuw ingesteld worden (schone installatie OSX);
Samsung Neo QLED QE65QN95A | Jamo S808 subwoofer | Dali Ikon 1 mk1 fronts | Bluesound Powernode N330 | Xbox Series S | Nvidia Shield | Intel NUC D34010WYK | Amino Aria 610

Witalik

Jammer dat er niets (voor zover ik lees van die post) aan de ondertiteling gedaan is voor het 3D gedeelte. Dat is hetgeen wat bij mij vaak fout gaat. 3D filmpje gedownload en dan speel je hem af en dan zet je de TV op SBS en dan is de ondertiteling gelijk verkeerd. Ik weet wel dat er programmas zijn om dat te fixen maar om dat elke keer te gaan doen wordt ik ook niet echt vrolijk van, ik ben meer van downloaden, afspelen en klaar.
Samsung Neo QLED 4K 65QN93B - Marantz NR-1508 - Bowers en Wilkins 606S2AE Custom HTPC -  XTZ 12.17 EDGE W&M LS-03 - fronts en center No name HDMI kabels


"Showcase"

skank1

Quote from: Witalik on September  9, 2013, 17:23:44
Jammer dat er niets (voor zover ik lees van die post) aan de ondertiteling gedaan is voor het 3D gedeelte. Dat is hetgeen wat bij mij vaak fout gaat. 3D filmpje gedownload en dan speel je hem af en dan zet je de TV op SBS en dan is de ondertiteling gelijk verkeerd. Ik weet wel dat er programmas zijn om dat te fixen maar om dat elke keer te gaan doen wordt ik ook niet echt vrolijk van, ik ben meer van downloaden, afspelen en klaar.

Euh... Het is alpha he.. Kom niet klagen over iets dat 50% af is he..
Da weet je op voorhand..
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

Witalik

Je hoeft niet zo in de verdedeging modus te gaan..

Ik heb die versie niet eens en ik zag over 3D wat dingen staan en ik gaf gewoon my 2 cents.
Samsung Neo QLED 4K 65QN93B - Marantz NR-1508 - Bowers en Wilkins 606S2AE Custom HTPC -  XTZ 12.17 EDGE W&M LS-03 - fronts en center No name HDMI kabels


"Showcase"

skank1

Waar haal je dan de info dat de subs in 3d net goed zijn.. :D
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

Witalik

omdat er volgens mij wat ik heb kunnen opzoeken alleen patches door mensen zelf gemaakt zijn om de subs met half sbs enzo goed te zetten...

Het zou fijn zijn als dit direct in XBMC zelf al in zouden bouwen. Of ik heb weer iets gemist, dat zou ook goed kunnen maar de films die ik afspeel in 3d kan ik niet kijken door die subs.
Samsung Neo QLED 4K 65QN93B - Marantz NR-1508 - Bowers en Wilkins 606S2AE Custom HTPC -  XTZ 12.17 EDGE W&M LS-03 - fronts en center No name HDMI kabels


"Showcase"

skank1

Ik volg je niet, je zegt dat je hem zelf niet geprobeerd hebt, en dan zeg je weer dat je de films die je afspeelt in 3d niet kan kijken door de subs?
Met wat speel je dan?

Anway, ik zie geen problemen
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

Witalik

Laat maar, geen zin om dingen te gaan herhalen.
Samsung Neo QLED 4K 65QN93B - Marantz NR-1508 - Bowers en Wilkins 606S2AE Custom HTPC -  XTZ 12.17 EDGE W&M LS-03 - fronts en center No name HDMI kabels


"Showcase"

Roderik

Quote from: Witalik on September  9, 2013, 17:23:44
Jammer dat er niets (voor zover ik lees van die post) aan de ondertiteling gedaan is voor het 3D gedeelte. Dat is hetgeen wat bij mij vaak fout gaat. 3D filmpje gedownload en dan speel je hem af en dan zet je de TV op SBS en dan is de ondertiteling gelijk verkeerd. Ik weet wel dat er programmas zijn om dat te fixen maar om dat elke keer te gaan doen wordt ik ook niet echt vrolijk van, ik ben meer van downloaden, afspelen en klaar.

Hier nog een.  :thumbs-up:
Ik hou van een beetje tweaken en instellen, maar als ik een filmpje aan wil zetten wil ik alleen op play hoeven drukken ;)

Loondijke

Is er een mogelijkheid om afleveringen van series als "watched" aan te geven? Ik heb nogal wat afleveringen erop staan welke ik al gezien heb, maar dat was voordat ik XBMC gebruikte. Ik heb eigenlijk weinig zin om alle 1000 afleveringen door te gaan spoelen  :clapping:.

Daarnaast werken ondertitels niet altijd even goed. Logisch, als het een BDMV of ISO is. Maar is hier een oplossing voor te bedenken? Denk het niet, maar kan het proberen.
Sony HW55  ISF | Kingpin VFS210 | Denon AVR-X4100W | Fronts; DALI Concept 8 | Center: DALI Concept | Rears: DALI Concept 1 | BK XXLS400 FF | HTPC + XBMC + Bluray Diskdrive | Panasonic BDT300 | Thecus N7510 + WD RED 28TB
Mijn topic;
Loondijke's Dedicated Attic-HT

skank1

Tuurlijk gewoon op de aflevering staan en markeren als watched..
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

Loondijke

Als het zo simpel was had ik het wel gevonden hoop ik toch :). Met welke knop doe je dat? Als ik i doe, dan kan ik dit niet kiezen. Snelkeuze menu ook niet.

Zie ik iets over het hoofd? :yawnee:
Sony HW55  ISF | Kingpin VFS210 | Denon AVR-X4100W | Fronts; DALI Concept 8 | Center: DALI Concept | Rears: DALI Concept 1 | BK XXLS400 FF | HTPC + XBMC + Bluray Diskdrive | Panasonic BDT300 | Thecus N7510 + WD RED 28TB
Mijn topic;
Loondijke's Dedicated Attic-HT


skank1

Quote from: Loondijke on September 10, 2013, 13:13:00
Als het zo simpel was had ik het wel gevonden hoop ik toch :). Met welke knop doe je dat? Als ik i doe, dan kan ik dit niet kiezen. Snelkeuze menu ook niet.

Zie ik iets over het hoofd? :yawnee:

Context menu en marken..
Of w toets van watched idd.
Toetsen kan je naar je hand zetten he
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

_ MarcelloW _

Quote from: skank1 on September 10, 2013, 12:59:54
Tuurlijk gewoon op de aflevering staan en markeren als watched..

Aflevering, seizoen.. je kunt zelfs een hele netwerkmap als "Watched" markeren met de "W" op je toetsenbord.

Ook ik support de zoek-functie! http://www.htforum.nl/yabbse/index.php?action=search2

| Me = M'n of Mijn | Is = Eens | Hun = Zij | Waar om doen men sen al die on nodig e spa ties over al tus sen ? | Hè = Heh? | Hé = Hey!

Loondijke

Pfffff. Schaaaaaam   :dozingoff::

Zal vanavond eens gaan kijken! Dank voor de input  :thumbs-up:
Sony HW55  ISF | Kingpin VFS210 | Denon AVR-X4100W | Fronts; DALI Concept 8 | Center: DALI Concept | Rears: DALI Concept 1 | BK XXLS400 FF | HTPC + XBMC + Bluray Diskdrive | Panasonic BDT300 | Thecus N7510 + WD RED 28TB
Mijn topic;
Loondijke's Dedicated Attic-HT

skank1

HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

StefaanD

Aangezien ik nog al wat onbekende films in de verzameling heb even de add-on Missing Movies geïnstalleerd om na te gaan hoeveel films XMBC niet heeft opgepikt bij het scrapen en dus ook domweg niet toont in zijn bibliotheek.

Dat zijn er nogal wat eigenlijk, vandaar de volgende vraag; kan je op een map meer dan één scraper aanduiden in XBMC ? Dus bv. standaard themoviedb scraper maar dat bij scannen/scrapen hij kan terugvallen op een andere als er met themoviedb scraper niets gevonden wordt ?

skank1

De eerste update voor versie 3.2 van het Open Embedded Linux Entertainment Center is uitgekomen. Deze Linux-distributie is gebaseerd op XBMC Media Center en kan een computer tot een volwaardige htpc omtoveren. OpenELEC is eenvoudig te installeren, onderhouden en gebruiken, en is verder klein en razendsnel. Naast de standaarddownload zijn er speciale versies voor AMD's Fusion- en Nvidia's ION-platform, Apple TV, Xtreamer Ultra en Raspberry Pi. De changelog voor deze versie laat de volgende veranderingen en verbeteringen zien:

Changelog
update to xf86-video-intel-2.99.903
update to xbmc-12.2-cd71444
update to linux-3.10.13
update to service.openelec.settings-0.2.16
update to bcm2835-bootloader-86e7643
update to bcm2835-driver-86e7643
update to llvm-3.3
update to libva-driver-intel-1.2.1
update to libaacs-0.6.0, convert to new package format
update to libbluray-0.3.0, convert to new package format
update to wlan-firmware-0.0.14
update to fuse-exfat-1.0.1
update to timezone-data-2013d
update RPi kernel patch
downgrade to xf86-video-fglrx-12.10
downgrade to curl-7.31.0, this should solve non working FTP sources in XBMC
linux: fix setting up ondemand up_threshold value
linux: add support for Ubiquiti WifiStation
linux: mac80211: ignore (E)CSA in probe response frames, this should fix #2617
busybox: prevent cdrom from autoclose, this should fix #2510
Fixed eventlircd's 03_0755_2626.evmap to make most of the buttons of iRF Media Technology W-01RN_USB_V3.1 IR remote work out of the box.
bluez: fix udev rule for logitech keyboard support, this should fix #2599
eventlircd: add support for MS-Tech remotes
kmod: add patch to support /storage/.config/modprobe.d
v4l-utils: added some keys to rc6_mce map for xbox360 slim black remote, fixes #2331
eventlircd: update holtek remote mappings
linux: fix tevi s471
eventlircd: set default first repeat to 1000ms to avoid double keypresses on some remotes
xbmc: After suspend wait for the first NIC to come up before continuing
projects/*/linux: remove PSTATE support again
bcm2835-bootloader: fix create sdcard script
udevil: add 'nonempty' option for exfat
udevil: support mounting disks without partition tables
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii

_ MarcelloW _

Quote from: StefaanD on September 17, 2013, 16:29:27
Aangezien ik nog al wat onbekende films in de verzameling heb even de add-on Missing Movies geïnstalleerd om na te gaan hoeveel films XMBC niet heeft opgepikt bij het scrapen en dus ook domweg niet toont in zijn bibliotheek.

Dat zijn er nogal wat eigenlijk, vandaar de volgende vraag; kan je op een map meer dan één scraper aanduiden in XBMC ? Dus bv. standaard themoviedb scraper maar dat bij scannen/scrapen hij kan terugvallen op een andere als er met themoviedb scraper niets gevonden wordt ?

Dat weet ik niet zeker. Ik zag wel bij de scraper opties dat je nog best wel wat kunt finetunen aan de scraper.

Ook ik support de zoek-functie! http://www.htforum.nl/yabbse/index.php?action=search2

| Me = M'n of Mijn | Is = Eens | Hun = Zij | Waar om doen men sen al die on nodig e spa ties over al tus sen ? | Hè = Heh? | Hé = Hey!

_ MarcelloW _

#848
Ook ik support de zoek-functie! http://www.htforum.nl/yabbse/index.php?action=search2

| Me = M'n of Mijn | Is = Eens | Hun = Zij | Waar om doen men sen al die on nodig e spa ties over al tus sen ? | Hè = Heh? | Hé = Hey!

skank1

Ben ik toch geen voorstander van...

Wie wil er nu een NAS onder z'n tv?
Of een heel lange hdmi kabel hebben....


No thank you :)
HT stijnopolis: Epson TW9300, Marantz sr7010, Custom 21:9 widescreen, Vero 4K, Fronts: Focal 826V, Center: Focal CC800V, Surrounds: Focal SR700 SurroundBacks: Focal 807V + Norstone stylum 2 stands.., Dual sub: SVS PC12SND-DSP/SVS Pb12+
Woonkamer setup: LG 4K Oled Tv 55C7V, Shield TV, Orange TV , JBL Bar 9.1
Gaming: : PS5, PS4, Nintendo Switch, Wii