Panasonic VT30 calibratie (FBr)

Started by Ertai, June 15, 2011, 11:37:37

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ertai

Hallo, ik zit op dit moment te overwegen om mijn nieuwe Panasonic VT30 te laten calibreren. Op dit moment gebruik ik vooral de THX stand alleen wat hierbij erg opvalt is dat het wit niet echt wit is maar een groene tint heeft. Naast dit probleem is er ook nog het (welbekende misschien) Fluctuating Brightness probleem wat inhoud dat de TV bij specifieke scenes in helderheid wisselt. Nu lees ik hier en daar op internet dat het brightness probleem met specifieke calibraties tot een minimum te beperken is, dat het nagenoeg niet meer opvalt.

Nu is mijn vraag, heeft u al ervaring met dit fenomeen en kunt u dit ook zo calibreren dat het veel minder aanwezig is zoals het nu is in THX stand?

Alvast bedankt!

J.A.F._Doorhof

Sowieso maakt de calibratie het beeld een stuk beter.
De fluctuaties kunnen onderdrukt worden maar is echt een "feature" van het toestel dus helemaal weg zal het niet gaan.
www.hometheater.nl   /   ISF & HAA certified
Custom installer

Volledige ISF calibraties inclusief HDR en 4K.

"Omdat je je iets niet kan voorstellen betekent dat niet dat het niet kan gebeuren"

Ertai

OK, bedankt voor de reactie :)

Ik heb een melding van het probleem gemaakt bij Panasonic dus ik wacht nog even af wat hun reactie zal zijn.

cooknl

Ik heb ook pas een VT30 gekocht en ik zou hem willen kalibreren, in welke tour Zou Alphen aan den Rijn liggen???
Ook wil ik weten wat U denkt van de auto kalibratie die gedaan wordt met de Calman software voor de VT-30.

Dank U

Rob
Rob
=============================================================

J.A.F._Doorhof

Die kan perfect in de Zeeland tour dus in juli.
Autocalibratie voor tv's geloof ik niet in, er zijn teveel variabelen die met elkaar samen werken en het kan nooit perfect bij een toestel dus moet iemand een concessie bepalen en ik denk dat ik daar beter in ben dan een programma ;)
www.hometheater.nl   /   ISF & HAA certified
Custom installer

Volledige ISF calibraties inclusief HDR en 4K.

"Omdat je je iets niet kan voorstellen betekent dat niet dat het niet kan gebeuren"

Robert Kok

Nou ik zou zeggen schrijf me maar in voor de Zeeland tour dan  :P.

Maar ik zou graag nog even telefonish kontakt met je hebben voordat je aan de tour begint.

Zou je zo vriendelijk willen zijn je Telefoon nummer te PM  dan bel ik je even wanneer je zegt dat het schikt.

Met vriendelijke groet

Rob

cooknl

Bovenstaande Reply is ook van mij cooknl. sorry maar ik had vergeten in te loggen dus cooknl is ook Robert Kok

Rob
Rob
=============================================================

J.A.F._Doorhof

@Rob,
Mail je vragen aub even naar info@hometheater.nl dan kan ik ze per mail beantwoorden, dat werkt vaak beter vooral bij technische dingen.
Mail anders even je telefoonnummer naar hetzelfde adres kan het niet via de mail bel ik je even.

Overdags zijn we gewoon te bereiken op 0527-636666
www.hometheater.nl   /   ISF & HAA certified
Custom installer

Volledige ISF calibraties inclusief HDR en 4K.

"Omdat je je iets niet kan voorstellen betekent dat niet dat het niet kan gebeuren"

cooknl

Rob
=============================================================

iBrad

Quote from: Ertai on June 15, 2011, 11:37:37
Hallo, ik zit op dit moment te overwegen om mijn nieuwe Panasonic VT30 te laten calibreren. Op dit moment gebruik ik vooral de THX stand alleen wat hierbij erg opvalt is dat het wit niet echt wit is maar een groene tint heeft. Naast dit probleem is er ook nog het (welbekende misschien) Fluctuating Brightness probleem wat inhoud dat de TV bij specifieke scenes in helderheid wisselt. Nu lees ik hier en daar op internet dat het brightness probleem met specifieke calibraties tot een minimum te beperken is, dat het nagenoeg niet meer opvalt.

Nu is mijn vraag, heeft u al ervaring met dit fenomeen en kunt u dit ook zo calibreren dat het veel minder aanwezig is zoals het nu is in THX stand?

Alvast bedankt!
8)

Hi, I'm an electronic QA engineer (No Panasonic), I have the TX-P42S30E (fw1.306) model and since the basic electronic design/driving method of these 2011 plasma are the same. This FBr affects this S30 also and as there is no official solution, try mine.
The (temporarily) FBr. fix is:

TAPE/Cover the front C.A.T.S. sensor with a dark tape/label. (I used a smal cut piece from the banner label/tag that comes with the tv) AND in the picture menu Set CATS/Eco Mode = ON.

Test/Proof/Explanation:
1)Set CATS=OFF. Watch a dvd/br/video when the scene change/jump to the 'Brighter' scene, Pause/rewind/replay these scenes and FBr. will shows up on the same brighter frame/position.
2)Now set CATS=ON (contrast/brightness will autoset to some levels), tape the sensor and watch the same brighter scenes and FBr. should be gone now or less visible, it is still there as the basic design/driving is still working.

3)Probably this is the Panasonic Autobright driving/feature designed to lower the powerconsumption?/ECO friendly?
As a HDjunk, I must say these Panasonic-eco engineers must be Blind!, putting crap on HD visuals!, a big Failure! Unacceptable!
-When the CATS=OFF, the Autobright 'feature' takes full control and will measure the (luminance?) scene by scene and adjust it in accordance= visible FBr.
-When the CATS=On, the sensed outside-light readings will now be mixed with the autobright-tech and adjusted.
-By taping the sensor and CATS=ON, the readings stablized at the lowest light level results less visible FBr.   
-Varying FBr. experiences depends on the settings CATS/Eco mode/Power savings/picture modes, thats why ppl see and some don't.

Ok, for the ones that cares, please test the above method and let us know if this helps you too, to have less FBr..

And if the someones can contact those Panasonic-engineers to fix this FBr. failure!
Thanks!

cooknl

I dont seem to have the flashing Briteness problem maybe the VT30 models are different/have a different firmware,
but I really dont see the problem.

What really bugs me is the fact that the picture is NOT as sharp as my old 2008 42px80e, this is very frustrating. I have tried many thing to make it better, but to no avail sofar. Have complained to the local dutch panasonic service center and I was supposed to call them back if it didnt improve after the breakin period. Well the thing has 250 plus hours on it and NOPE it has NOT gotten any better.

I just wonder if i should have the TV replaced or repaired BEFORE I have Frank do the calibration, Frank what do you think sir?
I understand that the calibration usually sharpens the picture but just wonder if I should not get Panasonic involved.

Any input you may have in english or Dutch will be graetly appreciated.

Rob
Rob
=============================================================

J.A.F._Doorhof

When you expect a replacement don't do the calibration, you can't use the settings on another unit.
www.hometheater.nl   /   ISF & HAA certified
Custom installer

Volledige ISF calibraties inclusief HDR en 4K.

"Omdat je je iets niet kan voorstellen betekent dat niet dat het niet kan gebeuren"

cooknl

Quote from: J.A.F._Doorhof on July  3, 2011, 20:37:31
When you expect a replacement don't do the calibration, you can't use the settings on another unit.

Ok dat dacht ik al, maar ik zal kijken wat Panasonic Support/Service my gaat voorstellen voor een oplossing.

Ik houd U op de hoogte.

Rob
Rob
=============================================================

Quick Reply

Warning: this topic has not been posted in for at least 60 days.
Unless you're sure you want to reply, please consider starting a new topic.

Name:
Email:
Verification:
Please leave this box empty:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Wat is de hoofdstad van Nederland:
Onze vlag is blauw, wit en:
Shortcuts: ALT+S post or ALT+P preview